Niu Guoyi, Zhang Tingrui, Cao Shengxiong, Zhang Xi, Tao Linli
Yunnan Provincial Laboratory of Animal Nutrition and Feed Science, Faculty of Animal Science and Technology, Yunnan Agricultural University, Kunming 650201, China.
College of Veterinary Medicine, Yunnan Agricultural University, Kunming 650201, China.
Animals (Basel). 2023 Jul 20;13(14):2364. doi: 10.3390/ani13142364.
This study investigates the effect of grinding methods, including roller mill, hammer mill, and two-stage grinding, on the particle size distribution of corn and the effect of corn particle size on the nutrient digestibility of native chickens in Southwest China. The roller mill, hammer mill, and a combination of the hammer mill and roller mill were used to obtain corn with various coarseness. Corn with different coarseness obtained using a combination of the hammer mill and roller mill was fed to Chahua chicken No. 2-type chickens (CHC2s). A total of 192 CHC2s in weeks 12 and 19 were randomly allocated to eight groups in triplicate. The results show that the geometric mean diameter (d) and the geometric standard deviation (S) were significantly ( < 0.05) affected by the grinding methods. The S obtained when using a sieve of 2.0 mm in a hammer mill was lower ( < 0.05) than that obtained using a 4.5 mm sieve. Combining the roller mill and hammer mill increased the uniformity of the particle size when grinding coarse particles. For fine particles, the d and S obtained when using the hammer mill were significantly lower ( < 0.05) than those obtained when using the roller mill and two-stage grinding method. Reducing the particle size of the corn (<900 µm) significantly increased the dry matter, crude protein, amino acid digestibility, and apparent metabolizable energy in the chicken in weeks 12 and 19. Fine particles significantly increased the crude protein digestibility of the CHC2s at week 12, while there was no significant effect on the crude protein and amino acid digestibility in the CHC2s at week 19. In conclusion, different grinding methods can affect the particle size distribution. For a coarse particle size, combining the roller mill and hammer mill tends to produce a more uniform particle size. Finely ground corn (between 700 µm and 900 µm) improved the dry matter (DM), apparent metabolizable energy (AME), and crude protein (CP) digestibility of the CHC2s at week 12. An increased particle size did not impact the CP and amino acid (AA) digestibility of the CHC2s at week 19.
本研究调查了包括辊磨机、锤磨机和两段式研磨在内的研磨方法对玉米粒度分布的影响,以及玉米粒度对中国西南地区土鸡营养消化率的影响。使用辊磨机、锤磨机以及锤磨机与辊磨机的组合来获得不同粗细程度的玉米。将通过锤磨机与辊磨机组合获得的不同粗细程度的玉米喂给茶花2号鸡(CHC2s)。在第12周和第19周时,将总共192只CHC2s随机分为8组,每组3个重复。结果表明,几何平均直径(d)和几何标准偏差(S)受研磨方法的影响显著(<0.05)。在锤磨机中使用2.0毫米筛网时获得的S低于(<0.05)使用4.5毫米筛网时获得的S。将辊磨机和锤磨机结合使用可提高粗颗粒研磨时粒度的均匀性。对于细颗粒,使用锤磨机时获得的d和S显著低于(<0.05)使用辊磨机和两段式研磨方法时获得的d和S。在第12周和第19周时,减小玉米粒度(<900 µm)显著提高了鸡的干物质、粗蛋白、氨基酸消化率和表观代谢能。细颗粒在第12周时显著提高了CHC2s的粗蛋白消化率,而在第19周时对CHC2s的粗蛋白和氨基酸消化率没有显著影响。总之,不同的研磨方法会影响粒度分布。对于粗粒度,将辊磨机和锤磨机结合使用往往会产生更均匀的粒度。在第12周时,细磨玉米(700 µm至900 µm之间)提高了CHC2s的干物质(DM)、表观代谢能(AME)和粗蛋白(CP)消化率。粒度增加对第19周时CHC2s的CP和氨基酸(AA)消化率没有影响。