Shu Ming, Yang Yang, Pan Fanda, Bian Tengfei, Li Qi, Liao Fu, He Wenmiao, Li Shitou, Xu Jian, Hu Tong, Qiao Pei, Zhong Weihong
China Tobacco Zhejiang Industrial Co., Ltd, Hangzhou, 310024, Zhejiang, People's Republic of China.
College of Biotechnology and Bioengineering, Zhejiang University of Technology, Hangzhou, 310032, Zhejiang, People's Republic of China.
Arch Microbiol. 2023 Aug 1;205(8):299. doi: 10.1007/s00203-023-03628-3.
Industrial tobacco waste was mainly treated via a reconstituted tobacco process using the paper-making method, which involves aqueous concentrated tobacco waste extract (cTWE) fermentation (aging). The fermentation was done to improve the quality of reconstituted tobacco. However, cTWE is a multi-stress environment that is characterized by low pH (about 4), as well as high sugar (above 150 g/L) and nicotine (above 15 g/L) content. In this study, a specific selection strategy was used to successfully isolate multi-stress-resistant bacterial or fungal strains, that exhibited positive effects on cTWE fermentation, thereby improving the quality of final products. A potential strain Zygosaccharomyces parabailii MC-5K3 was used for the bioaugmentation of cTWE fermentation and it significantly influenced the microbial diversity of the fermented cTWE. Zygosaccharomyces was observed to be the only dominant fungal genus instead of some pathogenic bacterial genera, with an abundance of over 95% after four days, and still more than 80% after a week. Meanwhile, metabolomics profiling showed significant concentration decrease with regard to some flavor-improving relative metabolites, such as 3-hydroxybenzoic acid (log2FC = - 5.25) and sorbitol (log2FC = - 5.54). This finding is extrapolated to be the key influence factor on the quality of the fermented cTWE. The correlation analysis also showed that the alterations in microbial diversity in the fermented cTWE led to some important differential metabolite changes, which finally improved various properties of tobacco products.
工业烟草废料主要通过造纸法再造烟叶工艺进行处理,该工艺涉及浓缩烟草废料水提取物(cTWE)发酵(陈化)。进行发酵是为了提高再造烟叶的质量。然而,cTWE是一个多胁迫环境,其特点是pH值低(约4),以及糖含量高(超过150 g/L)和尼古丁含量高(超过15 g/L)。在本研究中,采用了一种特定的筛选策略,成功分离出对cTWE发酵具有多胁迫抗性的细菌或真菌菌株,这些菌株对cTWE发酵具有积极影响,从而提高了最终产品的质量。一株潜在菌株巴氏接合酵母MC-5K3被用于cTWE发酵的生物强化,它显著影响了发酵后的cTWE的微生物多样性。观察到接合酵母是唯一的优势真菌属,而不是一些致病细菌属,四天后丰度超过95%,一周后仍超过80%。同时,代谢组学分析表明,一些改善风味的相关代谢物,如3-羟基苯甲酸(log2FC = -5.25)和山梨醇(log2FC = -5.54)的浓度显著降低。这一发现被推断为对发酵后的cTWE质量的关键影响因素。相关性分析还表明,发酵后的cTWE中微生物多样性的变化导致了一些重要的差异代谢物变化,最终改善了烟草产品的各种特性。