Suppr超能文献

经近红外光和宫腔镜引导的激光光纤机器人子宫峡部憩室切除术:一种新型高精度技术。

Near-infrared and hysteroscopy-guided robotic excision of uterine isthmocele with laser fiber: a novel high-precision technique.

机构信息

Division of Reproductive Endocrinology and Infertility, Department of Obstetrics, Gynecology, and Reproductive Biology, Brigham & Women's Hospital, Harvard Medical School, Boston, Massachusetts.

Division of Reproductive Endocrinology and Infertility, Department of Obstetrics, Gynecology, and Reproductive Biology, Brigham & Women's Hospital, Harvard Medical School, Boston, Massachusetts.

出版信息

Fertil Steril. 2023 Nov;120(5):1081-1083. doi: 10.1016/j.fertnstert.2023.08.006. Epub 2023 Aug 9.

Abstract

OBJECTIVE

To describe a novel high-precision technique for robotic excision of uterine isthmocele, employing a carbon dioxide laser fiber, under hysteroscopic guidance, and near-infrared guidance.

DESIGN

Video article.

PATIENT(S): A 36-year-old multipara with 3 prior cesarean sections presented to our infertility clinic with secondary infertility. The patient had been trying to conceive for 6 months without success. The patient underwent a hystero-salpingo contrast sonography that identified a large cesarean scar defect with a 1.4-mm residual myometrial thickness (RMT). The patient was counseled on surgical management with robotic approach because of RMT <3 mm precluding her from hysteroscopic resection and the potential risk for a cesarean scar ectopic or abnormal placentation if she were to become pregnant in the future. She elected to undergo excision and repair and informed consent was obtained from the patient.

INTERVENTION(S): The robot was docked for traditional gynecologic robotic surgery. The uterus was injected with 5 units of vasopressin. We used a carbon dioxide laser fiber (Lumenis FIberLase) at a power of 5 watts as the sole energy source for dissection. The bladder was dissected off the uterus to identify the general area of the isthmocele. At that point, diagnostic hysteroscopy was performed using a 30-degree 5-mm hysteroscope (Karl Storz) to identify and enter the isthmocele. Near-infrared vision (da Vinci Firefly, Intuitive USA) was activated to precisely outline the extent of the isthmocele, which was not visible with simple transillumination from the hysteroscope. We proceeded with laser excision in infrared/gray scale using the laser at a power of 20 watts removing the entire area that was highlighted by the Firefly. After full excision of the isthmocele, the hysteroscope was removed and was eventually replaced by a uterine manipulator (ConMed VCare DX). The hysterotomy was closed with a 2-layer closure: 4 mattress sutures of 2-0 Vicryl (Ethicon) followed by a running 2-0 PDS Stratafix (Ethicon). The peritoneal layer was closed over these 2 layers with 2-0 PDS Stratafix (Ethicon) in a running fashion. The uterine manipulator was removed and a 14 French Malecot catheter (Bard) was placed in the uterine cavity to allow the healing to proceed with minimal risk of cervical stenosis. The bladder was backfilled to ensure integrity of the bladder wall. Interceed adhesion barrier (Gynecare) was then placed over the area of the repair and the procedure was concluded. The patient included in this video gave consent for publication of the video and posting of the video online including social media, the journal website, scientific literature websites (such as PubMed, ScienceDirect, Scopus, etc.), and other applicable sites.

MAIN OUTCOME MEASURE(S): Completion of excision and repair of cesarean scar defect without surgical complications.

RESULT(S): Robotic excision and repair of a sizable uterine isthmocele with carbon dioxide laser fiber and da Vinci Firefly was completed successfully without any surgical complications. Diagnostic hysteroscopy was used to positively identify the isthmocele and provide transillumination. However, the thickness of the cervical myometrium only allows the hysteroscopic light to shine through the thinnest portion of myometrium at the apex of the isthmocele, whereas the near-infrared vision allowed by the da Vinci Firefly technology was used to precisely identify the borders of the defect. The carbon dioxide laser was used to completely remove the defect while avoiding damage to delicate reproductive tissue and over-excision. No complications were identified during the postoperative visit. Magnetic resonance imaging 3 months after the surgery revealed an RMT of 10 mm at the location of excision compared with the initial RMT of 1.4 mm.

CONCLUSION(S): Currently, there is no gold-standard technique for surgical management of isthmocele. This is the first description of the combined use of hysteroscopy, near-infrared vision, and laser fiber for the robotic excision of isthmocele. This specific setup proves to be a useful technical improvement. The use of near-infrared vision combined with precise hysteroscopic targeting allows much clearer definition of he isthmocele borders, and the flexible laser fiber allows millimetric xcision in the absence of appreciable lateral thermal spread. Further investigation is warranted to identify a gold-standard surgical technique for patients with cesarean scar defect.

摘要

目的

描述一种新的高精度机器人切除子宫峡部憩室的技术,该技术在宫腔镜引导下,利用二氧化碳激光光纤和近红外引导。

设计

视频文章。

患者

一位 36 岁的多产妇,有 3 次剖宫产史,因继发不孕就诊于我们的不孕诊所。该患者已尝试怀孕 6 个月,但未成功。患者接受了子宫输卵管造影超声检查,发现一个大的剖宫产瘢痕缺损,残余子宫肌层厚度(RMT)为 1.4mm。鉴于 RMT<3mm,不适合宫腔镜切除,且如果该患者将来怀孕,存在剖宫产瘢痕异位或异常胎盘植入的潜在风险,对该患者进行了机器人手术治疗。她选择进行切除和修复,并获得了患者的知情同意。

干预措施

机器人对接进行传统妇科机器人手术。子宫内注入 5 单位血管加压素。我们使用二氧化碳激光光纤(Lumenis FiberLase),功率为 5 瓦,作为唯一的能量源进行解剖。膀胱从子宫上分离出来,以确定子宫峡部憩室的大致区域。此时,使用 30 度 5mm 宫腔镜(Karl Storz)进行诊断性宫腔镜检查,以识别并进入子宫峡部憩室。激活近红外视觉(达芬奇萤火虫,直觉美国),以精确勾勒出子宫峡部憩室的范围,单纯通过宫腔镜的透射光无法看到。我们继续使用激光在红外/灰度模式下以 20 瓦的功率进行切除,切除萤火虫高亮显示的整个区域。子宫峡部憩室完全切除后,取出宫腔镜,最终用子宫操纵器(ConMed VCare DX)代替。用 2-0 Vicryl(Ethicon)缝合 4 个褥式缝合线关闭子宫切开术,然后用 2-0 PDS Stratafix(Ethicon)进行连续缝合。用 2-0 PDS Stratafix(Ethicon)连续缝合将腹膜层覆盖在这两层上。取出子宫操纵器,将 14 号法国男用导尿管(Bard)放入子宫腔,以最小的宫颈狭窄风险促进愈合。向膀胱内注水以确保膀胱壁完整。然后在修复区域放置 Interceed 粘连屏障(Gynecare),并完成手术。包括在本视频中的患者同意视频的发布和在线发布,包括社交媒体、杂志网站、科学文献网站(如 PubMed、ScienceDirect、Scopus 等)和其他适用网站。

主要观察指标

成功完成剖宫产瘢痕缺损的切除和修复,无手术并发症。

结果

成功完成了使用二氧化碳激光光纤和达芬奇萤火虫的机器人切除和修复大的子宫峡部憩室,无任何手术并发症。诊断性宫腔镜用于明确诊断子宫峡部憩室并提供透射光。然而,宫颈肌层的厚度仅允许宫腔镜的光线穿过子宫峡部憩室顶端最薄的部分,而达芬奇萤火虫技术提供的近红外视觉则用于精确识别缺损的边界。使用二氧化碳激光完全切除缺损,同时避免损伤生殖组织和过度切除。术后访视时未发现任何并发症。术后 3 个月的磁共振成像显示,与初始 RMT 为 1.4mm 相比,切除部位的 RMT 为 10mm。

结论

目前,对于子宫峡部憩室的手术治疗尚无金标准技术。这是首次描述宫腔镜、近红外视觉和激光光纤联合用于机器人切除子宫峡部憩室。这种特定的设置被证明是一种有用的技术改进。近红外视觉与精确的宫腔镜定位相结合,可更清晰地定义子宫峡部憩室的边界,而灵活的激光光纤则允许在不存在明显侧向热扩散的情况下进行毫米级切除。需要进一步研究以确定剖宫产瘢痕缺损患者的金标准手术技术。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验