Zhang Lingchao, Zhang Xin, Zhang Wenxuan, Huang Zhenguo, Fang Fang, Li Juan, Yang Limei, Gu Changdong, Sun Wenping, Gao Mingxia, Pan Hongge, Liu Yongfeng
State Key Laboratory of Silicon and Advanced Semiconductor Materials, Key Laboratory of Advanced Materials and Applications for Batteries of Zhejiang Province and School of Materials Science and Engineering, Zhejiang University, Hangzhou 310058, China.
Taizhou Institute of Zhejiang University, Taizhou 318000, China.
ACS Appl Mater Interfaces. 2023 Aug 30;15(34):40558-40568. doi: 10.1021/acsami.3c07952. Epub 2023 Aug 15.
High thermal stability and sluggish absorption/desorption kinetics are still important limitations for using magnesium hydride (MgH) as a solid-state hydrogen storage medium. One of the most effective solutions in improving hydrogen storage properties of MgH is to introduce a suitable catalyst. Herein, a novel nanoparticulate ZrNi with 10-60 nm in size was successfully prepared by co-precipitation followed by a molten-salt reduction process. The 7 wt % nano-ZrNi-catalyzed MgH composite desorbs 6.1 wt % hydrogen starting from ∼178 °C after activation, lowered by 99 °C relative to the pristine MgH (∼277 °C). The dehydrided sample rapidly absorbs ∼5.5 wt % H when operating at 150 °C for 8 min. The remarkably improved hydrogen storage properties are reasonably ascribed to the in situ formation of ZrH, ZrNi, and MgNiH caused by the disproportionation reaction of nano-ZrNi during the first de-/hydrogenation cycle. These catalytic active species are uniformly dispersed in the MgH matrix, thus creating a multielement, multiphase, and multivalent environment, which not only largely favors the breaking and rebonding of H-H bonds and the transfer of electrons between H and Mg but also provides multiple hydrogen diffusion channels. These findings are of particularly scientific importance for the design and preparation of highly active catalysts for hydrogen storage in light-metal hydrides.
高热稳定性和迟缓的吸/放氢动力学仍然是氢化镁(MgH)作为固态储氢介质应用的重要限制因素。改善MgH储氢性能最有效的解决方案之一是引入合适的催化剂。在此,通过共沉淀法随后进行熔盐还原工艺,成功制备了尺寸为10 - 60 nm的新型纳米颗粒ZrNi。7 wt%纳米ZrNi催化的MgH复合材料在活化后从约178 °C开始解吸出6.1 wt%的氢,相对于原始MgH(约277 °C)降低了99 °C。在150 °C下运行8分钟时,脱氢后的样品迅速吸收约5.5 wt%的H。储氢性能的显著改善合理地归因于在第一次脱氢/加氢循环中纳米ZrNi的歧化反应原位形成ZrH、ZrNi和MgNiH。这些催化活性物种均匀地分散在MgH基体中,从而形成多元素、多相和多价环境,这不仅极大地有利于H - H键的断裂和重新结合以及H与Mg之间的电子转移,还提供了多个氢扩散通道。这些发现对于设计和制备用于轻金属氢化物储氢的高活性催化剂具有特别重要的科学意义。