Towler H, Mitchell S R, King M A
School of Sport, Exercise and Health Sciences, Loughborough University, Loughborough, LE11 3TS, UK.
Electrical and Manufacturing Engineering, Wolfson School of Mechanical, Loughborough University, Loughborough, UK.
Sci Rep. 2023 Aug 28;13(1):14060. doi: 10.1038/s41598-023-37108-x.
How the racket properties impact performance of the badminton smash is relatively unknown, and further insight could help players/coaches select the most appropriate racket. Three-dimensional position data of the racket and shuttlecock were collected (500 Hz) for 20 experienced badminton players performing a series of forehand smashes with five swingweight ([Formula: see text]) perturbed rackets, ranging from 85-106 kg·cm. [Formula: see text] was calculated using a balance board and simple pendulum method, and modal analysis was performed using laser vibrometry to capture the fundamental frequency and distal node location for each racket. As [Formula: see text] increased a reduction in racket head speed was found with on average a 0.7 m·s decrease per 5 kg·cm increase in [Formula: see text], however this did not lead to slower shuttlecock speeds. The impact location tended to move closer to the tip as the fundamental frequency node moved closer to the tip (as [Formula: see text] increased), providing some evidence that participants may subconsciously strike the shuttlecock at the node location to provide desirable sensory feedback. The increase in racket head speed but not shuttlecock speed was likely due to the distal increase in longitudinal impact location as [Formula: see text] increased, as well as an increase in effective mass for a given impact location. Additionally, removal of the deformation component (additional racket head speed due to the racket noticeably bending and recovering) of racket head speed increased the effect size of the relationship with [Formula: see text], where rackets with greater [Formula: see text] had larger deformation velocities. The research provides further insight into the smash performance characteristics of experienced badminton players, particularly based on racket properties. Further research is required to confirm the coincidence between node location and longitudinal impact location.
球拍属性如何影响羽毛球扣杀的表现相对未知,进一步的深入了解有助于球员/教练选择最合适的球拍。收集了20名经验丰富的羽毛球运动员使用五支不同挥重([公式:见正文])的扰动球拍进行一系列正手扣杀时球拍和羽毛球的三维位置数据(500赫兹),挥重范围为85 - 106千克·厘米。[公式:见正文]通过平衡板和单摆法计算得出,并使用激光测振仪进行模态分析以获取每支球拍的基频和远端节点位置。随着[公式:见正文]增加,发现球拍头速度降低,平均每增加5千克·厘米的[公式:见正文],球拍头速度降低0.7米/秒,然而这并未导致羽毛球速度变慢。随着基频节点向拍头靠近(随着[公式:见正文]增加),击球位置倾向于向拍头尖端移动,这提供了一些证据表明参与者可能下意识地在节点位置击球以获得理想的感官反馈。球拍头速度增加而羽毛球速度未增加可能是由于随着[公式:见正文]增加纵向击球位置在远端增加,以及在给定击球位置有效质量增加。此外,去除球拍头速度的变形分量(由于球拍明显弯曲和恢复而产生的额外球拍头速度)增加了与[公式:见正文]关系的效应量,其中[公式:见正文]较大的球拍具有更大的变形速度。该研究进一步深入了解了经验丰富的羽毛球运动员的扣杀表现特征,特别是基于球拍属性。需要进一步研究以确认节点位置与纵向击球位置之间的一致性。