Suppr超能文献

基于透明质酸和乳糖改性壳聚糖的抗菌和生物活性多层电纺伤口敷料。

Antibacterial and bioactive multilayer electrospun wound dressings based on hyaluronic acid and lactose-modified chitosan.

机构信息

Department of Medicine, Surgery and Health Sciences, University of Trieste, Piazza dell'Ospitale 1, 34129 Trieste, Italy.

Department of Medicine, Surgery and Health Sciences, University of Trieste, Via Licio Giorgieri 5, 34127 Trieste, Italy.

出版信息

Biomater Adv. 2023 Nov;154:213613. doi: 10.1016/j.bioadv.2023.213613. Epub 2023 Aug 28.

Abstract

Antibacterial multilayer electrospun matrices based on hyaluronic acid (HA) and a lactose-modified chitosan (CTL) were synthetized (i) by combining electrospun polycaprolactone (PCL) and polysaccharidic matrices in a bilayer device and (ii) by sequentially coating the PCL mat with CTL and HA. In both cases, the antibacterial activity was provided by loading rifampicin within the PCL support. All matrices disclosed suitable morphology and physicochemical properties to be employed as wound dressings. Indeed, both the bilayer and coated fibers showed an optimal swelling capacity (3426 ± 492 % and 1435 ± 251 % after 7 days, respectively) and water vapor permeability (160 ± 0.78 g/mh and 170 ± 12 g/mh at 7 days, respectively). On the other hand, the polysaccharidic dressings were completely wettable in the presence of various types of fluids. Depending on the preparation method, a different release of both polysaccharides and rifampicin was detected, and the immediate polysaccharide dissolution from the bilayer structure impacted the antibiotic release (42 ± 4 % from the bilayer structure against 25 ± 2 % from the coated fibers in 4 h). All the multilayer matrices, regardless of their production strategy and composition, revealed optimal biocompatibility and bioactivity with human dermal fibroblasts, as the released bioactive polysaccharides induced a faster wound closure in the cell monolayer (100 % in 24 h) compared to the controls (78 ± 8 % for untreated cells and 89 ± 5 % for cells treated with PCL alone, after 24 h). The inhibitory and bactericidal effects of the rifampicin loaded matrices were assessed on S. aureus, S. epidermidis, E. coli, and P. aeruginosa. The antibacterial matrices were found to be highly effective except for E. coli, which was more resistant even at higher amounts of rifampicin, with a bacterial concentration of 6.4 ± 0.4 log CFU/mL and 6.8 ± 0.3 log CFU/mL after 4 h in the presence of the rifampicin-loaded bilayer and coated matrices, respectively.

摘要

基于透明质酸 (HA) 和乳糖修饰壳聚糖 (CTL) 的抗菌多层静电纺丝基质通过以下两种方法合成:(i) 在双层装置中结合静电纺丝聚己内酯 (PCL) 和多糖基质,以及 (ii) 依次用 CTL 和 HA 对 PCL 基质进行涂层。在这两种情况下,PCL 载体中负载利福平以提供抗菌活性。所有基质均显示出合适的形态和物理化学性质,可作为伤口敷料使用。事实上,双层和涂层纤维均表现出最佳的溶胀能力(分别为 7 天后 3426 ± 492%和 1435 ± 251%)和水蒸气透过率(分别为 7 天后 160 ± 0.78 g/mh 和 170 ± 12 g/mh)。另一方面,多糖敷料在存在各种类型的液体时完全可润湿。根据制备方法的不同,检测到两种多糖和利福平的释放不同,双层结构中多糖的即刻溶解会影响抗生素的释放(4 小时内,从双层结构中释放 42 ± 4%,而从涂层纤维中释放 25 ± 2%)。所有多层基质,无论其生产策略和组成如何,与人类真皮成纤维细胞均显示出最佳的生物相容性和生物活性,因为释放的生物活性多糖在细胞单层中促进更快的伤口闭合(24 小时内达到 100%),而对照组(未经处理的细胞为 78 ± 8%,单独用 PCL 处理的细胞为 89 ± 5%,24 小时后)。负载利福平的基质对金黄色葡萄球菌、表皮葡萄球菌、大肠杆菌和铜绿假单胞菌的抑制和杀菌效果进行了评估。结果发现,抗菌基质的效果非常显著,除了大肠杆菌,即使在更高浓度的利福平存在下,大肠杆菌的耐药性也更高,在负载利福平的双层和涂层基质存在的情况下,4 小时后细菌浓度分别为 6.4 ± 0.4 log CFU/mL 和 6.8 ± 0.3 log CFU/mL。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验