Suppr超能文献

大结节内侧移位:它会影响肩部外展力矩吗?

Greater tuberosity medial malposition: does it affect shoulder abductor moment?

作者信息

Bekmezci Taner, Çepni Serdar Kamil, Demir Tuğcan

机构信息

Physiotheraphy and Rehabilitation Department, T.C. Istanbul Yeni Yüzyıl University Faculty of Health Sciences, Maltepe Mahallesi, Yılanlı Ayazma Caddesi, No: 26 P.K. 34010 Cevizlibağ, Zeytinburnu, İstanbul, Turkey.

Orthopaedics and Traumatology Department, University of Health Sciences Istanbul Umraniye Training and Research Hospital, Elmalıkent Mahallesi Adem Yavuz Cad. No:1 Ümraniye, İstanbul, Turkey.

出版信息

Int Orthop. 2024 Jan;48(1):159-167. doi: 10.1007/s00264-023-05967-8. Epub 2023 Sep 5.

Abstract

PURPOSE

The detrimental effect of greater tuberosity malposition on functional scores is well known. Superior or posterior malpositions exceeding five mm lead to excessive loading on the deltoid strength. However, the significance of situations where greater tuberosity becomes medialized due to the compressive effect of the locking plate fixation, especially in fractures with metaphyseal dead space, has not been emphasized. It is hypothesized that this condition may cause shortening of the rotator cuff moment arm and consequently impact functional scores.

METHODS

Between 2012 and 2018, 52 patients, aged 65,28 (ranging 40-85) proximal humerus fractures treated with locking plate fixation were included in the study. Cephalodiaphyseal angle, greater tuberosity displacement , patients reported outcome and Constant-Murley scores were evaluated.

RESULTS

The mean Constant Murley score was determined to be 78.76 (ranging from 38 to 100). According to the patients reported outcome 39 excellent , five good , two fair, six poor results were observed. Avascular necrosis with screw migration was detected in five cases, while one patient experienced implant insufficiency along with varus deformity. Greater tuberosity was found to be positioned between 6 mm posterior-superior and -13 mm medial. Significant medial malposition was observed in three patients, with -9, -12, and -13 mm of medialization, respectively. Cephalodiaphysial angle was determined as 139.30 degrees (ranging from 120 to 150 degrees) and showed weak correlation with the functional score. Greater tuberosity medialization also showed weak correlation with the Constant-Murley score. The values exhibiting deviation were associated with low patient-reported outcome results and functional scores. In the examination of greater tuberosity displacement values, it was observed that Neer type 3 and 4 fractures differed significantly from Neer type 2 fractures regarding to Kruskal-Wallis test.

CONCLUSIONS

Medial impaction of greater tuberosity may be the reason of decreased functional scores, similar to superior or posterior malposition. The medialization of greater tuberosity should be considered as a potential factor leading to the shortening of the rotator cuff's abductor moment.

摘要

目的

大结节位置不佳对功能评分的不利影响是众所周知的。大结节向上或向后移位超过5毫米会导致三角肌承受过大负荷。然而,由于锁定钢板固定的压缩作用导致大结节内移的情况的重要性,尤其是在伴有干骺端死腔的骨折中,尚未得到重视。据推测,这种情况可能会导致肩袖力矩臂缩短,从而影响功能评分。

方法

2012年至2018年间,52例年龄为65.28岁(40 - 85岁)的肱骨近端骨折患者接受了锁定钢板固定治疗并纳入本研究。评估头干角、大结节移位情况、患者报告的结果以及Constant-Murley评分。

结果

Constant Murley评分的平均值为78.76(范围为38至100)。根据患者报告的结果,观察到39例为优,5例为良,2例为中,6例为差。5例检测到伴有螺钉移位的缺血性坏死,1例患者出现植入物失效并伴有内翻畸形。发现大结节位于后上方6毫米至内侧13毫米之间。3例患者观察到明显的内侧移位,内侧移位分别为 - 9毫米、 - 12毫米和 - 13毫米。头干角确定为139.30度(范围为120至150度),与功能评分呈弱相关性。大结节内移与Constant-Murley评分也呈弱相关性。出现偏差的值与患者报告的低结果和功能评分相关。在检查大结节移位值时,观察到Neer 3型和4型骨折在Kruskal-Wallis检验方面与Neer 2型骨折有显著差异。

结论

大结节内侧撞击可能是功能评分降低的原因,类似于向上或向后移位。大结节内移应被视为导致肩袖外展力矩缩短的潜在因素。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验