Khedr Tamer M, El-Sheikh Said M, Kowalska Ewa
Institute for Catalysis, Hokkaido University, N21, W10, Sapporo 001-0021, Japan.
Nanomaterials and Nanotechnology Department, Central Metallurgical Research and Development Institute (CMRDI), P.O. Box 87 Helwan, Cairo 11421, Egypt.
Nanomaterials (Basel). 2023 Aug 28;13(17):2438. doi: 10.3390/nano13172438.
The development of visible-light-responsive (VLR) semiconductor materials for effective water oxidation is significant for a sustainable and better future. Among various candidates, bismuth tungstate (BiWO; BWO) has attracted extensive attention because of many advantages, including efficient light-absorption ability, appropriate redox properties (for O generation), adjustable morphology, low cost, and profitable chemical and optical characteristics. Accordingly, a facile solvothermal method has been proposed in this study to synthesize two-dimensional (2D) BWO nanoplates after considering the optimal preparation conditions (solvothermal reaction time: 10-40 h). To find the key factors of photocatalytic performance, various methods and techniques were used for samples' characterization, including XRD, FE-SEM, STEM, TEM, HRTEM, BET-specific surface area measurements, UV/vis DRS, and PL spectroscopy, and photocatalytic activity was examined for water oxidation under UV and/or visible-light (vis) irradiation. Famous commercial photocatalyst-P25 was used as a reference sample. It was found that BWO crystals grew anisotropically along the {001} basal plane to form nanoplates, and all properties were controlled simultaneously by tuning the synthesis time. Interestingly, the most active sample (under both UV and vis), prepared during the 30 h solvothermal reaction at 433 K (BWO-30), was characterized by the smallest specific surface area and the largest crystals. Accordingly, it is proposed that improved crystallinity (which hindered charge carriers' recombination, as confirmed by PL), efficient photoabsorption (using the smallest bandgap), and 2D mesoporous structure are responsible for the best photocatalytic performance of the BWO-30 sample. This report shows for the first time that 2D mesoporous BWO nanoplates might be successfully prepared through a facile template-free solvothermal approach. All the above-mentioned advantages suggest that nanostructured BWO is a prospective candidate for photocatalytic applications under natural solar irradiation.
开发用于高效水氧化的可见光响应(VLR)半导体材料对于实现可持续和更美好的未来具有重要意义。在各种候选材料中,钨酸铋(BiWO₄;BWO)因其诸多优点而备受关注,这些优点包括高效的光吸收能力、合适的氧化还原性质(用于生成O₂)、可调节的形态、低成本以及良好的化学和光学特性。因此,本研究提出了一种简便的溶剂热法,在考虑最佳制备条件(溶剂热反应时间:10 - 40小时)后合成二维(2D)BWO纳米片。为了找出光催化性能的关键因素,采用了各种方法和技术对样品进行表征,包括XRD、FE - SEM、STEM、TEM、HRTEM、BET比表面积测量、UV/vis DRS和PL光谱,并在紫外和/或可见光(vis)照射下考察了水氧化的光催化活性。著名的商业光催化剂 - P25用作参考样品。研究发现,BWO晶体沿{001}基面各向异性生长形成纳米片,并且通过调节合成时间可以同时控制所有性能。有趣的是,在433 K下30小时溶剂热反应过程中制备的最活跃样品(在紫外和可见光下均如此)(BWO - 30)具有最小的比表面积和最大的晶体。因此,有人提出,结晶度的提高(PL证实这阻碍了电荷载流子的复合)、有效的光吸收(使用最小的带隙)和二维介孔结构是BWO - 30样品最佳光催化性能的原因。本报告首次表明,二维介孔BWO纳米片可能通过简便的无模板溶剂热方法成功制备。上述所有优点表明,纳米结构的BWO是自然太阳辐射下光催化应用的潜在候选材料。