An innovative method for human height estimation combining video images and 3D laser scanning.

Digitalization has increased the number of video surveillance systems that sometimes capture crime images. Traditional methods of human height estimation use projective geometry. However, sometimes they cannot be used because the video camera surveillance system is not available or has been moved and there are no reference lines on the frame. Scientific studies have developed a new method for human height estimation using 3D laser scanning. This model necessarily requires a series of approximations, which increase the final measurement error. To overcome this problem, in the present study, images of a subject are projected directly on the 3D model, estimating the height of the subject. This article describes the methodological approach adopted through the analysis of a real case study in a controlled environment executed by Carabinieri Forensic Investigation Department (Italy). The aim is to obtain a human anthropometric measure derived from frames extracted from the videos associated with the digital survey of the framed area obtained with 3D laser scanning and point cloud analysis. The result is the height estimation of five subjects filmed by a camera obtained through the combination of 2D images extracted by a DVR/surveillance systems with 3D laser scanning. Results show that most estimated measurements are less than the real measurement of the subject; it also depends on the posture of the subject while walking. Furthermore, results shows the differences between the real height and the estimated height with a statistical approach.