The relative dominance of surface oxygen content over pore properties in controlling adsorption and retrograde behavior of gaseous toluene over microporous carbon.

The adsorption potential of activated carbon (AC) derived from macadamia nut shells (product code of Procarb-900: namely, AC-P) has been investigated using gaseous toluene as the target pollutant. The powder AC-P with high-microporosity (96%) and oxygen content (5.62%) exhibited very high adsorption capacity (214 mg·g) and partition coefficient (PC: 25 mol·kg·Pa) against 100 ppm (10 Pa) toluene at 99% breakthrough levels (1 atm dry N). The factors governing toluene adsorption were explored with respect to the key variables such as surface functional groups, pore size distribution, sorbent bed mass (50, 100, and 150 mg), and particle size (i.e., 0.212-0.6 mm (powder AC: PAC)) vs. 0.6-2.36 mm (granular AC: GAC)). Accordingly, the adsorption process was physical, mainly due to the non-polar interactions (i.e., π-π interactions) between the adsorbent and adsorbate molecules. The high affinity of AC-P at low breakthrough levels was obtained through a combination of smaller particle size (PAC) and larger adsorbent mass (i.e., 150 mg) with the appearance of a very pronounced retrograde phenomenon (e.g., at < 1% breakthrough level). As such, toluene adsorption appeared to be affected more sensitively by particle size and adsorbent mass (especially at low breakthrough levels) than by high microporosity. Most importantly, the oxygen content of AC emerges as one of the key factors governing the maximum capacity, as the changes in pore volume are not crucial to explain the observed adsorption patterns of toluene.