Université de Lyon, INSA-Lyon, Université Claude Bernard Lyon 1, UJM-Saint Etienne, CNRS, Inserm, CREATIS UMR 5220, U1206, Lyon, France.
Siemens Healthcare SAS, Saint-Denis, France.
NMR Biomed. 2023 Dec;36(12):e5025. doi: 10.1002/nbm.5025. Epub 2023 Oct 5.
Implementing a standardized phosphorus-31 magnetic resonance spectroscopy ( P-MRS) dynamic acquisition protocol to evaluate skeletal muscle energy metabolism and monitor muscle fatigability, while being compatible with various longitudinal clinical studies on diversified patient cohorts, requires a high level of technicality and expertise. Furthermore, processing data to obtain reliable results also demands a great degree of expertise from the operator. In this two-part article, we present an advanced quality control approach for data acquired using a dynamic P-MRS protocol. The aim is to provide decision support to the operator to assist in data processing and obtain reliable results based on objective criteria. We present here, in part 1, an advanced data quality control (QC) approach of a dynamic P-MRS protocol. Part 2 is an impact study that will demonstrate the added value of the QC approach to explore data derived from two clinical populations that experience significant fatigue, patients with coronavirus disease 2019 and multiple sclerosis. In part 1, P-MRS was performed using 3-T clinical MRI in 175 subjects from clinical and healthy control populations conducted in a University Hospital. An advanced data QC score (QCS) was developed using multiple objective criteria. The criteria were based on current recommendations from the literature enriched by new proposals based on clinical experience. The QCS was designed to indicate valid and corrupt data and guide necessary objective data editing to extract as much valid physiological data as possible. Dynamic acquisitions using an MR-compatible ergometer ran over a rest (40 s), exercise (2 min), and a recovery phase (6 min). Using QCS enabled rapid identification of subjects with data anomalies, allowing the user to correct the data series or reject them partially or entirely, as well as identify fully valid datasets. Overall, the use of the QCS resulted in the automatic classification of 45% of the subjects, including 58 participants who had data with no criterion violation and 21 participants with violations that resulted in the rejection of all dynamic data. The remaining datasets were inspected manually with guidance, allowing acceptance of full datasets from an additional 80 participants and recovery phase data from an additional 16 subjects. Overall, more anomalies occurred with patient data (35% of datasets) compared with healthy controls (15% of datasets). In conclusion, the QCS ensures a standardized data rejection procedure and rigorous objective analysis of dynamic P-MRS data obtained from patients. This methodology contributes to efforts made to standardize P-MRS practices that have been underway for a decade, with the goal of making it an empowered tool for clinical research.
实施标准化的磷-31 磁共振波谱(P-MRS)动态采集方案,以评估骨骼肌能量代谢并监测肌肉疲劳性,同时兼容各种针对不同患者队列的纵向临床研究,需要高度的专业性和技术。此外,为了获得可靠的结果,操作人员还需要对数据进行处理。在这篇两部分的文章中,我们提出了一种先进的数据质量控制方法,用于处理使用动态 P-MRS 方案采集的数据。目的是为操作人员提供决策支持,以协助数据处理,并根据客观标准获得可靠的结果。本文第一部分介绍了一种先进的动态 P-MRS 方案的数据质量控制(QC)方法。第二部分是一项影响研究,将展示 QC 方法的附加价值,以探索来自两个经历显著疲劳的临床人群的数据,即 COVID-19 患者和多发性硬化症患者。第一部分中,在一家大学医院对来自临床和健康对照组的 175 名受试者进行了 3-T 临床 MRI 下的 P-MRS 检查。使用基于文献的多个客观标准开发了先进的数据 QC 评分(QCS)。该标准基于文献中的现有建议,并结合临床经验提出了新的建议。QCS 的设计旨在指示有效和腐败的数据,并指导必要的客观数据编辑,以提取尽可能多的有效生理数据。使用与磁共振兼容的测力计进行动态采集,持续休息(40 秒)、运动(2 分钟)和恢复阶段(6 分钟)。使用 QCS 可以快速识别出数据异常的受试者,允许用户纠正数据序列,或者部分或全部拒绝数据,以及识别完全有效的数据集。总体而言,QCS 的使用自动分类了 45%的受试者,其中 58 名受试者的数据没有违反任何标准,21 名受试者的所有动态数据都被拒绝。其余数据集由用户手动检查,并指导用户接受来自另外 80 名受试者的完整数据集和另外 16 名受试者的恢复阶段数据。总体而言,与健康对照组(15%的数据集)相比,患者数据(35%的数据集)中出现的异常更多。总之,QCS 确保了标准化的数据拒绝程序和对从患者获得的动态 P-MRS 数据的严格客观分析。这种方法有助于努力使 P-MRS 实践标准化,该实践已经进行了十年,目标是使其成为临床研究的有力工具。