Removal of heavy metals from the aqueous solution by nanomaterials: a review with analysing and categorizing the studies.

With the development of nanotechnology and its application in various sciences, scientists have investigated the use of nanoparticles as adsorbents to remove heavy metals from aqueous solutions all over the world. So far, the results of many of these studies have been published in reputable journals. Obviously, reviewing these articles and summarizing the results of these studies from different aspects will provide new perspectives for the development of this technology for heavy metals removal from water. So the current study was performed to review the results of the published studies between 1/January/1980 to 1/January/2022. The focus of the study is on the analysis of these studies and their classification. In addition, a more detailed investigation was carried out. Among the 5155 articles, 576 articles were included based on Cochrane protocols. Results show that most of the studies (90.8%) were conducted on a laboratory scale and used synthetic solutions. Most studies were performed for Pb, Cd and Cu, removal respectively. Compared to other countries, authors with affiliation from China and Iran have published more articles. The ranking of the use of various nanomaterials were: nanocomposites > metal oxide nanomaterials > metal-based nanomaterials > carbon-based nanomaterials > dendrimers, with the wide range of sizes from less than 10 nm to several hundreds of nanometers. The required amount of carbon-based nanoparticles to remove many heavy metals were lower than other nanoparticles. In most studies, pH ≤ 7 has been reported as optimal. Most studies have been followed pseudo second-order and pseudo first-order reactions and have been more agreement with Langmuir and Freundlich adsorption isotherms respectively. The results of studies show that the synthesis and optimization of new nanomaterials can be considered as a new and competitive technology. However, more studies are needed to investigate the removal of heavy metals in real samples and to overcome some challenges in the full-scale application.