Shao Li, Moehl Gilles E, Huang Ruomeng, Hector Andrew L
School of Chemistry, University of Southampton, Highfield Southampton SO17 1BJ UK
School of Electronics and Computer Science, University of Southampton Southampton SO17 1BJ UK.
RSC Adv. 2023 Nov 6;13(46):32660-32671. doi: 10.1039/d3ra06588j. eCollection 2023 Oct 31.
Fractal-like networks of gold nanoparticles created by templated electrodeposition are described. Templated electrodeposition is a powerful and efficient technique for the bottom-up fabrication of nanostructures which can effectively control the size and shape of the electrodeposits. In this work, mesoporous silica films with highly ordered mesopores and three-dimensional mesostructure are synthesised and are used as templates for the electrodeposition of gold nanoparticles. The mesoporous silica films have small mesopores (∼8 nm) and complex mesopore channels ( structure with the [0 1 0] axis perpendicular to the substrate). A variety of nucleation conditions were applied to investigate their effect on the nanoparticles' arrangement and growth in templated electrodeposition. The electrodeposited gold particles are characterised by electron microscopy and grazing incidence small-angle X-ray scattering (GISAXS). GISAXS shows changes in the lattice parameters of the mesostructure after gold electrodeposition that relate to dimensional changes in directions linked to the shortest distances between the main spherical pores. Top-view SEM shows large areas of gold nanoparticles were deposited into the film and they were growing towards the surface. After removing the silica film templates, the gold nanoparticles display interesting fractal morphologies: the linked gold nanonetworks form a branched structure. The lengths of branches vary from the applied nucleation deposition conditions. Generally, with increasing nucleation time, fractal gold nanoparticles with longer branches are more likely to be obtained.
本文描述了通过模板电沉积法制备的类分形金纳米颗粒网络。模板电沉积是一种用于自下而上制备纳米结构的强大而高效的技术,它可以有效地控制电沉积物的尺寸和形状。在这项工作中,合成了具有高度有序介孔和三维介观结构的介孔二氧化硅薄膜,并将其用作金纳米颗粒电沉积的模板。介孔二氧化硅薄膜具有小的介孔(约8纳米)和复杂的介孔通道(结构的[0 1 0]轴垂直于基底)。应用了各种成核条件来研究它们对模板电沉积中纳米颗粒排列和生长的影响。通过电子显微镜和掠入射小角X射线散射(GISAXS)对电沉积的金颗粒进行了表征。GISAXS显示金电沉积后介观结构晶格参数的变化,这些变化与与主要球形孔之间最短距离相关方向上的尺寸变化有关。俯视扫描电子显微镜显示大面积的金纳米颗粒沉积在薄膜中,并且它们朝着表面生长。去除二氧化硅薄膜模板后,金纳米颗粒呈现出有趣的分形形态:相连的金纳米网络形成分支结构。分支的长度因所施加的成核沉积条件而异。一般来说,随着成核时间的增加,更有可能获得具有更长分支的分形金纳米颗粒。