Department of Surgery, Oregon Health & Science University, Portland, OR, USA.
Division of Abdominal Organ Transplantation, Oregon Heath & Science University, Portland, OR, USA.
Prog Transplant. 2023 Dec;33(4):341-347. doi: 10.1177/15269248231212920. Epub 2023 Nov 14.
Renal allograft hypothermic machine perfusion results in a decreased incidence of delayed graft function compared with static cold storage. Ensuring perfusate temperatures remain within the target range of 4-10 °C may impact delayed graft function rates. To identify whether this target was achieved and, if not, whether higher perfusate temperature was associated with delayed graft function. In this retrospective cohort study, transplanted grafts from deceased donors placed on hypothermic machine perfusion pump from June 2019 to August 2020 were analyzed. Measurements were recovered after 5, 15, 60, and 180 min of perfusion. Univariable and multivariable analyses were performed to identify predictors of delayed graft function. A total of 113 grafts from 94 donors were analyzed. Of these, 21 (19%) developed delayed graft function. On univariable logistic regression, variables associated with delayed graft function included older donor age (OR 1.08, = .002), higher Kidney Donor Profile Index score (OR 1.03, = .024), and higher 5-min perfusate temperature (T5 min; OR 1.49, = .014). A higher T5 min was also associated with delayed graft function in multivariable logistic regression models (OR 1.58, = .005; OR 1.37, = .08). Grafts with T5 min >10 °C were more likely to experience delayed graft function than those with T5 min <10 °C (OR 4.5, = .006). Higher early perfusate temperature was an independent predictor of delayed graft function and may be due to inadequate cooling of the circuit prior to placing grafts on pump. Quality improvement initiatives targeting early perfusate temperatures of ≤10 °C may reduce delayed graft function incidence.
肾移植供体低温机器灌注可降低延迟供体功能的发生率,与静态冷藏相比。确保灌流液温度保持在 4-10°C 的目标范围内可能会影响延迟供体功能的发生率。为了确定是否达到了这一目标,如果没有达到,是否较高的灌流液温度与延迟供体功能有关。在这项回顾性队列研究中,分析了 2019 年 6 月至 2020 年 8 月期间放置在低温机器灌注泵上的已故供体移植的移植物。在灌注后 5、15、60 和 180 分钟时恢复测量。进行单变量和多变量分析以确定延迟供体功能的预测因素。共分析了 94 名供体的 113 个移植物。其中,21 个(19%)发生了延迟供体功能。在单变量逻辑回归中,与延迟供体功能相关的变量包括供体年龄较大(OR 1.08, = .002)、较高的肾脏供体评分指数(OR 1.03, = .024)和较高的 5 分钟灌流液温度(T5 分钟;OR 1.49, = .014)。T5 分钟较高也与多变量逻辑回归模型中的延迟供体功能相关(OR 1.58, = .005;OR 1.37, = .08)。T5 分钟>10°C 的移植物比 T5 分钟<10°C 的移植物更有可能发生延迟供体功能(OR 4.5, = .006)。较高的早期灌流液温度是延迟供体功能的独立预测因子,这可能是由于在将移植物放置在泵上之前,冷却回路不足。针对≤10°C 的早期灌流液温度的质量改进措施可能会降低延迟供体功能的发生率。