Department of Orthopaedic Surgery, The Jikei University Kashiwa Hospital, Chiba, Japan.
Department of Orthopaedic Surgery, The Jikei University School of Medicine, Tokyo, Japan.
Medicine (Baltimore). 2023 Nov 17;102(46):e36088. doi: 10.1097/MD.0000000000036088.
A cervical pedicle screw (CPS) serves as an important anchor for cervical surgeries. Its placement requires the development of a highly safe and easy-to-handle method. Considering that the lateral end of the cortical bone of the spinal canal (LE point) is the most crucial for CPS placement, we devised a U-shaped wire capable of identifying LE points under direct vision and reliably confirming the site with C-arm lateral fluoroscopy.
A 65-year-old male, who had been aware of numbness in both hands, mild finger dexterity disorder, and gait disturbance for half a year, visited our hospital due to the progression of his symptoms in the previous 2 months.
The patient presented with mild muscle weakness and tendon hyperreflexia in the upper and lower extremities on both sides, and magnetic resonance imaging revealed moderate spinal canal stenosis at the C4/5 and 5/6 levels. Based on the local third cervical vertebra (C3)/4 angle of -10 degrees and the C2/7 angle of -15 degrees, the patient was diagnosed with cervical myelopathy with cervical kyphosis. He had a Japanese Orthopaedic Association score for cervical myelopathy of 10.
We placed CPSs at C3 using a U-shaped wire. After placing an anchor in the range of C3-T1, laminectomy from C4 to C7 was performed. Subsequently, corrective fixation was performed to reduce kyphosis, followed by bone grafting in the range of C3-T1 and complete posterior cervical decompression fixation.
The CPSs were placed at C3 without deviation and intra- or postoperative complications. The surgery resulted in improvement in kyphosis with a C2/7 angle of -5 degrees and recovery in spinal cord disorder with a Japanese Orthopedic Association score for cervical myelopathy of 13.
A U-shaped wire, which can be prepared inexpensively and easily, is a useful tool, especially for inexperienced surgeons, for safe CPS placement by capture of LE points accurately.
颈椎椎弓根螺钉(CPS)是颈椎手术的重要固定物。其置入需要开发一种高度安全且易于操作的方法。鉴于椎管皮质骨的侧端(LE 点)是 CPS 置入最关键的部位,我们设计了一种 U 形钢丝,能够在直视下识别 LE 点,并通过 C 臂侧位透视可靠地确认该部位。
一名 65 岁男性,双手麻木半年,轻度手指灵巧度障碍,步态不稳,近 2 个月症状加重就诊我院。
患者双侧上下肢肌力轻度减弱,腱反射亢进,颈椎 MRI 显示 C4/5 和 5/6 水平椎管中度狭窄。根据局部第三颈椎(C3)/4 角-10 度和 C2/7 角-15 度,诊断为颈椎后纵韧带骨化症合并颈椎后凸,颈椎曲度变直伴脊髓型颈椎病,日本矫形外科学会评分(JOA)为 10 分。
使用 U 形钢丝在 C3 置入 CPS。在 C3-T1 范围内置入锚钉后,行 C4 至 C7 椎板切除术。随后进行矫正固定以降低后凸畸形,再行 C3-T1 范围内植骨及全颈椎后路减压固定。
C3 处的 CPS 置入无偏差,无术中或术后并发症。术后后凸畸形得到改善,C2/7 角为-5 度,脊髓功能障碍得到恢复,日本矫形外科学会评分(JOA)为 13 分。
U 形钢丝可以廉价且方便地制备,是一种有用的工具,尤其是对于经验不足的外科医生,通过准确捕获 LE 点,可安全置入 CPS。