Suppr超能文献

基于 CT 计算机建模的股骨假体尺寸解剖学参考评估。

An Evaluation of Anatomic Referencing for Femoral Component Sizing Using Computed Tomography-Based Computer Modeling.

机构信息

Department of Orthopedic Surgery, Penn State Health, St. Joe's Medical Center, Reading, Pennsylvania.

Department of Orthopedic Surgery, Zucker School of Medicine at Hofstra/Northwell, Garden City, New York.

出版信息

J Knee Surg. 2024 Jul;37(9):638-641. doi: 10.1055/a-2240-3566. Epub 2024 Jan 8.

Abstract

One of the critical steps in total knee arthroplasty is femoral component positioning and sizing. Historically, there was wider variability between femoral component sizes, necessitating the concepts of anterior referencing (AR) and posterior referencing (PR). With the introduction of smaller increments between sizes, the concept of anatomic referencing has been introduced to replace AR and PR. The intent of this study was to validate the concept of anatomic referencing and show that with 2 mm increments in femoral sizes, the femoral component can be placed flush to the anterior cortex while maintaining posterior condylar offset (PCO). Digital surface models were created using 515 femurs from an established computed tomography database. Virtual bone resections, component sizing and placement were performed assuming neutral mechanical axis and a cartilage thickness of 2 mm. The appropriately sized femoral component, which had 2 mm incremental sizes, was placed flush with the anterior cortex with restoration of the PCO. The anterior-posterior distance from the posterior surface of the component to the medial and lateral surfaces of the posterior condylar cartilage were measured. The medial condyle was the limiting condyle in the majority of cases (73%). The average medial gap after appropriate femoral component matching was 0.6 mm (0.39-1.41 mm) across all sizes. The overall average condylar gap was 1.02 mm. The most common femoral component was a size 7 (57.2 mm) and the average femoral AP width was 55.9 mm. Anatomic referencing with an implant system that has 2-mm increments in femoral component sizing provides an alternative to AR and PR without compromise. Anatomic referencing allows for perfect alignment of the anterior flange of the femoral component to the anterior cortex of the femur while restoring the native PCO to within 1 mm. This avoids having to choose between AR or PR when in between femoral sizes.

摘要

在全膝关节置换术中,股骨部件的定位和尺寸选择是至关重要的步骤之一。历史上,股骨部件的尺寸之间存在更大的差异,这就需要采用前参照(AR)和后参照(PR)的概念。随着尺寸之间更小的增量的引入,已经引入了解剖参照的概念来替代 AR 和 PR。本研究的目的是验证解剖参照的概念,并表明在股骨尺寸增加 2 毫米的情况下,股骨部件可以与前皮质平齐,同时保持后髁偏心距(PCO)。使用来自已建立的计算机断层扫描数据库的 515 个股骨创建了数字表面模型。假设机械轴中立且软骨厚度为 2 毫米,进行虚拟骨切除、部件尺寸选择和放置。放置具有 2 毫米增量尺寸的适当大小的股骨部件,使其与前皮质平齐,并恢复 PCO。测量从部件的后表面到后髁软骨的内侧和外侧表面的前后距离。在大多数情况下(73%),内侧髁是限制髁。在适当的股骨部件匹配后,内侧间隙的平均宽度为 0.6 毫米(0.39-1.41 毫米),所有尺寸的平均值。总的平均髁间间隙为 1.02 毫米。最常见的股骨部件是 7 号(57.2 毫米),平均股骨前后宽度为 55.9 毫米。具有股骨部件尺寸 2 毫米增量的植入物系统的解剖参照提供了替代 AR 和 PR 的方法,而不会有任何妥协。解剖参照允许股骨部件的前凸缘与股骨的前皮质完美对齐,同时将原生 PCO 恢复到 1 毫米以内。这避免了在股骨尺寸之间必须在 AR 或 PR 之间进行选择。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验