Filardi Leah R, Vila Fernando D, Hong Jiyun, Hoffman Adam S, Perez-Aguilar Jorge E, Bare Simon R, Runnebaum Ron C, Kronawitter Coleman X
Department of Chemical Engineering, University of California, Davis, Davis, California 95616, United States.
Department of Physics, University of Washington, Seattle, Washington 98195, United States.
J Phys Chem C Nanomater Interfaces. 2024 Jan 10;128(3):1165-1176. doi: 10.1021/acs.jpcc.3c06527. eCollection 2024 Jan 25.
Soft-oxidant-assisted methane coupling has emerged as a promising pathway to upgrade methane from natural gas sources to high-value commodity chemicals, such as ethylene, at selectivities higher than those associated with oxidative (O) methane coupling (OCM). To date, few studies have reported investigations into the electronic structure and the microscopic physical structure of catalytic active sites present in the binary metal oxide catalyst systems that are known to be effective for this reaction. Correlating the catalyst activity to specific active site structures and electronic properties is an essential aspect of catalyst design. Here, we used X-ray absorption spectroscopy at the Ca K-edge to ascertain the most probable local environment of Ca in the ZnO-supported Ca oxide catalysts. These catalysts are shown here to be active for NO-assisted methane coupling (NO-OCM) and have previously been reported to be active for CO-assisted methane coupling (CO-OCM). X-ray absorption near edge structure features at multiple Ca loadings are interpreted through simulated spectra derived from full multiple scattering calculations. These simulations included consideration of CaO structures organized in multiple spatial arrangements-linear, planar, and cubic-with separate analyses of Ca atoms in the surfaces and bulk of the three-dimensional structures. The morphology of the oxide clusters was found to influence the various regions of the X-ray absorption spectrum differently. Experiment and theory show that for low-Ca-loading catalysts (≤1 mol %), which contain sites particularly active for methane coupling, Ca primarily exists in an oxidized state that is consistent with the coordination environment of Ca ions in one- and two-dimensional clusters. In addition to their unique nanoscale structures, the spectra also indicate that these clusters have varying degrees of undercoordinated surface Ca atoms that could further influence their catalytic activities. The local Ca structure was correlated to methane coupling activity from NO-OCM and previously reported CO-OCM reactor studies. This study provides a unique perspective on the relationship between the catalyst physical and electronic structure and active sites for soft-oxidant-assisted methane coupling, which can be used to inform future catalyst development.
软氧化剂辅助甲烷偶联已成为一种有前景的途径,可将天然气来源的甲烷升级为高价值的商品化学品,如乙烯,其选择性高于与氧化(O)甲烷偶联(OCM)相关的选择性。迄今为止,很少有研究报道对已知对该反应有效的二元金属氧化物催化剂体系中催化活性位点的电子结构和微观物理结构进行研究。将催化剂活性与特定的活性位点结构和电子性质相关联是催化剂设计的一个重要方面。在这里,我们利用钙K边的X射线吸收光谱来确定氧化锌负载氧化钙催化剂中钙最可能的局部环境。这些催化剂在此显示出对一氧化氮辅助甲烷偶联(NO-OCM)具有活性,并且先前已报道对一氧化碳辅助甲烷偶联(CO-OCM)具有活性。通过全多重散射计算得出的模拟光谱来解释多个钙负载量下的X射线吸收近边结构特征。这些模拟包括考虑以多种空间排列(线性、平面和立方)组织的氧化钙结构,并对三维结构的表面和体相中钙原子进行单独分析。发现氧化物簇的形态对X射线吸收光谱的不同区域有不同影响。实验和理论表明,对于低钙负载量催化剂(≤1 mol%),其含有对甲烷偶联特别活跃的位点,钙主要以氧化态存在,这与一维和二维簇中钙离子的配位环境一致。除了其独特的纳米级结构外,光谱还表明这些簇具有不同程度的低配位表面钙原子,这可能进一步影响它们的催化活性。局部钙结构与来自NO-OCM和先前报道的CO-OCM反应器研究的甲烷偶联活性相关。这项研究为软氧化剂辅助甲烷偶联的催化剂物理和电子结构与活性位点之间的关系提供了独特的视角,可用于指导未来的催化剂开发。