Wang Jingfan, Zhao Xing, Wang Yan, Li Da
Opt Express. 2024 Jan 15;32(2):2081-2096. doi: 10.1364/OE.512285.
Optical diffraction tomography (ODT) is a promising label-free imaging method capable of quantitatively measuring the three-dimensional (3D) refractive index distribution of transparent samples. In recent years, partially coherent ODT (PC-ODT) has attracted increasing attention due to its system simplicity and absence of laser speckle noise. Quantitative phase imaging (QPI) technologies represented by Fourier ptychographic microscopy (FPM), differential phase contrast (DPC) imaging and intensity diffraction tomography (IDT) need to collect several or hundreds of intensity images, which usually introduce motion artifacts when shooting fast-moving targets, leading to a decrease in image quality. Hence, a quantitative real-time phase microscopy (qRPM) for extended depth of field (DOF) imaging based on 3D single-shot differential phase contrast (ssDPC) imaging method is proposed in this research study. qRPM incorporates a microlens array (MLA) to simultaneously collect spatial information and angular information. In subsequent optical information processing, a deconvolution method is used to obtain intensity stacks under different illumination angles in a raw light field image. Importing the obtained intensity stack into the 3D DPC imaging model is able to finally obtain the 3D refractive index distribution. The captured four-dimensional light field information enables the reconstruction of 3D information in a single snapshot and extending the DOF of qRPM. The imaging capability of the proposed qRPM system is experimental verified on different samples, achieve single-exposure 3D label-free imaging with an extended DOF for 160 µm which is nearly 30 times higher than the traditional microscope system.
光学衍射层析成像(ODT)是一种很有前景的无标记成像方法,能够定量测量透明样品的三维(3D)折射率分布。近年来,部分相干ODT(PC-ODT)因其系统简单且不存在激光散斑噪声而受到越来越多的关注。以傅里叶叠层显微镜(FPM)、微分相衬(DPC)成像和强度衍射层析成像(IDT)为代表的定量相成像(QPI)技术需要采集几张或数百张强度图像,在拍摄快速移动目标时通常会引入运动伪影,导致图像质量下降。因此,本研究提出了一种基于三维单次微分相衬(ssDPC)成像方法的用于大景深(DOF)成像的定量实时相显微镜(qRPM)。qRPM采用微透镜阵列(MLA)同时采集空间信息和角度信息。在后续的光学信息处理中,使用去卷积方法在原始光场图像中获取不同照明角度下的强度堆栈。将获得的强度堆栈导入三维DPC成像模型最终能够获得三维折射率分布。捕获的四维光场信息能够在单次快照中重建三维信息并扩展qRPM的景深。所提出的qRPM系统的成像能力在不同样品上得到了实验验证,实现了单次曝光三维无标记成像,大景深达160 µm,比传统显微镜系统高出近30倍。