Department of Chemistry, University of Utah; Salt Lake City, Utah 84112, United States.
Electronic BioSciences, Inc., 421 Wakara Way, Suite 328, Salt Lake City, Utah 84108, United States.
ACS Nano. 2024 Mar 5;18(9):7241-7252. doi: 10.1021/acsnano.3c12627. Epub 2024 Feb 20.
Simultaneous multipass resistive-pulse sensing and fluorescence imaging have been used to correlate the size and fluorescence intensity of individual lipid liposomes composed of polar lipid extracts labeled with membrane-bound 3,3-dioctadecyloxacarbocyanine (DiO) fluorescent molecules. Here, a nanopipet serves as a waveguide to direct excitation light to the resistive-pulse sensing zone at the end of the nanopipet tip. Individual DiO-labeled liposomes (>50 nm radius) were multipassed back and forth through the orifices of glass nanopipets' 110-150 nm radius via potential switching to obtain subnanometer sizing precision, while recording the fluorescence intensity of the membrane-bound DiO molecules. Fluorescence was measured as a function of liposome radius and found to be approximately proportional to the total membrane surface area. The observed relationship between liposome size and fluorescence intensity suggests that multivesicle liposomes emit greater fluorescence compared to unilamellar liposomes, consistent with all lipid membranes of the multivesicle liposomes containing DiO. Fluorescent and nonfluorescent liposomes are readily distinguished from each other in the same solution using simultaneous multipass resistive-pulse sensing and fluorescence imaging. A fluorescence "dead zone" of ∼1 μm thickness just outside of the nanopipet orifice was observed during resistive-pulse sensing, resulting in "on/off" fluorescent behavior during liposome multipassing.
同时进行的多通电阻脉冲感应和荧光成像技术被用于关联由带有膜结合 3,3-二辛基氧杂羰花青(DiO)荧光分子标记的极性脂质提取物组成的个体脂质体的大小和荧光强度。在这里,纳米管用作波导,将激发光引导到纳米管尖端的电阻脉冲感应区。通过电位切换,将大于 50nm 半径的单个 DiO 标记脂质体反复通过玻璃纳米管的 110-150nm 半径的孔,以获得亚纳米级的尺寸精度,同时记录膜结合的 DiO 分子的荧光强度。测量荧光强度与脂质体半径的关系,发现其与总膜表面积大致成正比。观察到的脂质体大小与荧光强度之间的关系表明,多泡脂质体比单层脂质体发射更强的荧光,这与多泡脂质体中所有含有 DiO 的脂质膜一致。使用同时进行的多通电阻脉冲感应和荧光成像技术,可以在同一溶液中轻易区分荧光和非荧光脂质体。在电阻脉冲感应过程中,在纳米管孔外观察到约 1μm 厚的荧光“死区”,导致脂质体多通过时出现“开/关”荧光行为。