Department of Chemical Engineering, The University of Melbourne, Parkville, Victoria, 3010, Australia; Australian Laboratory for Emerging Contaminants, School of Chemistry, The University of Melbourne, Victoria, 3010, Australia.
Department of Chemical Engineering, The University of Melbourne, Parkville, Victoria, 3010, Australia.
Water Res. 2024 May 1;254:121349. doi: 10.1016/j.watres.2024.121349. Epub 2024 Feb 20.
Foaming in aerated bioreactors at wastewater treatment plants (WWTPs) has been identified as an operational issue for decades. However, the affinity of per- and polyfluoroalkyl substances (PFAS) for air-liquid interfaces suggests that foam harvesting has the potential to become a sustainable method for PFAS removal from sewage. Aerated bioreactors' foams are considered three-phase systems, comprising air, aqueous and solid components, the latter consisting of activated sludge biomass. To achieve a comprehensive understanding of the capability of aerated bioreactors' foams to enrich PFAS, we analysed PFAS concentrations from WWTPs in both the solid and aqueous phases of the collapsed foams (foamate) and underlying bulk mixed liquors. Our findings show that PFAS enrichment occurs not only in the aqueous phase but also in the solid phase of the foamate. This suggests that previous field studies that only analysed the aqueous phase may have underestimated the capability of the aerated bioreactors' foams to enrich PFAS. Fractions of PFOA and PFOS sorbed to the solid phase of the foamate can be as high as 60 % and 95 %, respectively. Our findings highlight the importance of implementing effective foamate management strategies that consider both the aqueous and solid phases.
在污水处理厂(WWTP)中,充气生物反应器中的泡沫问题已经存在了几十年。然而,由于全氟和多氟烷基物质(PFAS)对气液界面的亲和力,泡沫收集有可能成为从污水中去除 PFAS 的可持续方法。充气生物反应器的泡沫被认为是三相系统,包括空气、水相和固体成分,后者由活性污泥生物量组成。为了全面了解充气生物反应器泡沫富集 PFAS 的能力,我们分析了来自 WWTP 的泡沫(泡沫液)和底层混合液中固相与水相中的 PFAS 浓度。我们的研究结果表明,PFAS 的富集不仅发生在水相,也发生在泡沫液的固相。这表明,以前只分析水相的现场研究可能低估了充气生物反应器泡沫富集 PFAS 的能力。被吸附到泡沫液固相中的 PFOA 和 PFOS 分数分别高达 60%和 95%。我们的研究结果强调了实施有效的泡沫液管理策略的重要性,这些策略需要同时考虑水相和固相。