Energy, Materials and Environment Laboratory, Faculty of Engineering, Universidad de La Sabana, Campus Universitario Puente del Común, Km. 7 Autopista Norte, 250001, Bogotá, Colombia; Doctoral Program in Engineering, Faculty of Engineering, Universidad de La Sabana, Campus Universitario Puente del Común, Km. 7 Autopista Norte, 250001, Bogotá, Colombia; Department of Chemical Engineering and Analytical Chemistry, University of Barcelona, 08028, Barcelona, Spain.
Energy, Materials and Environment Laboratory, Faculty of Engineering, Universidad de La Sabana, Campus Universitario Puente del Común, Km. 7 Autopista Norte, 250001, Bogotá, Colombia.
Environ Res. 2024 Jun 15;251(Pt 1):118525. doi: 10.1016/j.envres.2024.118525. Epub 2024 Feb 24.
Cheese whey (CW) and dairy manure (DM) are the main residues from the dairy industry, both of which can led to significant negative environment impacts if not properly managed. However, their combined anaerobic digestion represents an opportunity to obtain bioenergy and a stabilised material as a soil improver on the farm. Biochemical potential of methane (BMP) assays were carried out at psychrophilic conditions (20 °C) to analyse the influence on biomethane production of different CW:DM mixtures (% w/w) at different of inoculum-to-substrate ratios (ISR). Based on the BMP results, a life cycle assessment (LCA) of the cheese manufacturing process was carried out considering two scenarios (i) considering the current process, where propane gas and electricity are used for cheese production (ii) the incorporation of the biogas generated in the cheese production process in the company. BMP results showed that the best mixture between CW and DM was 65:35 (weight basis) at an organic load of 0.6 gVS/L (ISR of X). The LCA showed that CW and DM anaerobic digestion allowed to reduce the cheese manufacturing carbon footprint from through the substitution of propane by the biogas produced, changing from 5.5 to 3.1 kg CO-eq/kg cheese produced, which indicates that according to the monthly production (633.6 kg) it would stop emitting about 1519 kg CO-eq, i.e. a saving in terms of emissions of approximately 43,6% of the total currently generated.
奶酪乳清(CW)和奶牛粪便(DM)是乳制品工业的主要残留物,如果处理不当,都会对环境造成严重的负面影响。然而,将它们进行联合厌氧消化处理则为获得生物能源和一种稳定的物质以作为农场土壤改良剂提供了机会。采用生化甲烷潜力(BMP)测定法在低温条件(20°C)下进行,以分析不同 CW:DM 混合物(按重量计)在不同接种物与底物比(ISR)下对生物甲烷生产的影响。基于 BMP 结果,对奶酪制造过程进行了生命周期评估(LCA),考虑了两种情况:(i)考虑当前过程,即丙烷气和电用于奶酪生产;(ii)将奶酪生产过程中产生的沼气纳入公司。BMP 结果表明,CW 和 DM 的最佳混合物为 65:35(按重量计),有机负荷为 0.6 gVS/L(ISR 为 X)。LCA 表明,CW 和 DM 的厌氧消化允许通过用生产的沼气替代丙烷来减少奶酪制造的碳足迹,从每公斤奶酪产生的 5.5 千克 CO-eq 减少到 3.1 千克 CO-eq,这表明根据每月的产量(633.6 千克),它将停止排放约 1519 千克 CO-eq,即排放量减少了约 43.6%,与目前的排放量相比。