Aliakbari Farhang, Stocek Noah B, Cole-André Maxximuss, Gomes Janice, Fanchini Giovanni, Pasternak Stephen H, Christiansen Gunna, Morshedi Dina, Volkening Kathryn, Strong Michael J
Molecular Medicine Group, Robarts Research Institute, Schulich School of Medicine and Dentistry, University of Western Ontario, London, Ontario N6A 3K7, Canada.
Department of Physics and Astronomy, University of Western Ontario, London, Ontario N6A 3K7, Canada.
Biol Methods Protoc. 2024 Feb 13;9(1):bpae009. doi: 10.1093/biomethods/bpae009. eCollection 2024.
We present four different protocols of varying complexity for the isolation of cell culture-derived extracellular vesicles (EVs)/exosome-enriched fractions with the objective of providing researchers with easily conducted methods that can be adapted for many different uses in various laboratory settings and locations. These protocols are primarily based on polymer precipitation, filtration and/or ultracentrifugation, as well as size-exclusion chromatography (SEC) and include: (i) polyethylene glycol and sodium chloride supplementation of the conditioned medium followed by low-speed centrifugation; (ii) ultracentrifugation of conditioned medium; (iii) filtration of conditioned media through a 100-kDa exclusion filter; and (iv) isolation using a standard commercial kit. These techniques can be followed by further purification by ultracentrifugation, sucrose density gradient centrifugation, or SEC if needed and the equipment is available. HEK293 and SH-SY5Y cell cultures were used to generate conditioned medium containing exosomes. This medium was then depleted of cells and debris, filtered through a 0.2-µM filter, and supplemented with protease and RNAse inhibitors prior to exosomal isolation. The purified EVs can be used immediately or stably stored at 4°C (up to a week for imaging or using intact EVS downstream) or at -80°C for extended periods and then used for biochemical study. Our aim is not to compare these methodologies but to present them with descriptors so that researchers can choose the "best method" for their work under their individual conditions.
我们提供了四种不同复杂度的方案,用于分离细胞培养来源的细胞外囊泡(EVs)/富含外泌体的组分,目的是为研究人员提供易于操作的方法,这些方法可适用于各种实验室环境和地点的多种不同用途。这些方案主要基于聚合物沉淀、过滤和/或超速离心,以及尺寸排阻色谱法(SEC),包括:(i)向条件培养基中添加聚乙二醇和氯化钠,然后进行低速离心;(ii)对条件培养基进行超速离心;(iii)通过100 kDa排阻滤器过滤条件培养基;(iv)使用标准商业试剂盒进行分离。如果需要且有可用设备,这些技术之后可通过超速离心、蔗糖密度梯度离心或SEC进一步纯化。使用HEK293和SH-SY5Y细胞培养物来生成含有外泌体的条件培养基。然后将该培养基中的细胞和碎片去除,通过0.2 µm滤器过滤,并在进行外泌体分离之前添加蛋白酶和RNA酶抑制剂。纯化后的EVs可立即使用,或在4°C稳定保存(长达一周用于成像或下游使用完整的EVs),或在-80°C长期保存,然后用于生化研究。我们的目的不是比较这些方法,而是用描述符来呈现它们,以便研究人员能够在各自的条件下为其工作选择“最佳方法”。