Corin USA, Raynham, Massachusetts, USA.
Sydney Orthopaedic Research Institute, Sydney, New South Wales, Australia.
Knee Surg Sports Traumatol Arthrosc. 2024 Apr;32(4):915-928. doi: 10.1002/ksa.12104. Epub 2024 Mar 1.
The relationship between constitutional coronal alignment and implant positioning on trochlear groove restoration in total knee arthroplasty (TKA) is poorly understood. This study aimed to determine whether the choice of alignment philosophy significantly affects the restoration of the trochlea groove.
Sixty-one imageless robotic TKAs performed by a single orthopaedic surgeon were retrospectively reviewed. In each case, the entire native trochlea was digitized to generate the native femoral anatomy, and implants were planned according to a functional alignment (FA) technique. Final implant position was recorded using the validated bone resection planes from the navigation system. Simulated femoral component positions were generated according to previously described alignment techniques: mechanical alignment (MA), gap balancing (GB), kinematic alignment (KA), restricted kinematic alignment (rKA) and restricted inverse kinematic alignment (riKA). Trochlear angle (TA), trochlear under/overstuffing and mediolateral sulcus offset were compared between the six simulated alignment techniques, as well as the final implanted technique. Further analyses investigated the effect of preoperative coronal alignment on trochlear position. Comparisons were assessed with an analysis of variance and Welch's t-tests or Wilcoxon's rank-sum tests with Bonferroni corrections.
The implanted and simulated techniques all resulted in greater TA valgus compared to the native groove (p < 0.001). The implanted technique, KA and rKA were closer to the native TA than GB, MA and riKA (p > 0.001). All alignment philosophies understuffed the native trochlea groove. KA and rKA understuffed less than all other techniques (p < 0.001), and GB understuffed more than all other techniques (p < 0.001). In extension, all techniques shifted the trochlear sulcus laterally, while in flexion, they medialized it. These effects were most prominent in GB and MA.
Personalized alignment techniques such as KA and rKA, which consider variations in individual anatomy, best restore the native patellar groove compared to systematic alignment techniques when using a standardized femoral component.
Level III, retrospective review.
全膝关节置换术(TKA)中,关节面冠状对线与滑车沟假体位置的关系尚未明确。本研究旨在确定对线理念的选择是否会显著影响滑车沟的重建。
回顾性分析了一位骨科医生进行的 61 例无图像引导机器人 TKA。在每个病例中,均对整个原始滑车进行数字化以生成原始股骨解剖结构,并根据功能对线(FA)技术规划假体。使用导航系统验证的截骨平面记录最终假体位置。根据先前描述的对线技术模拟股骨组件位置:机械对线(MA)、间隙平衡(GB)、运动对线(KA)、受限运动对线(rKA)和受限反向运动对线(riKA)。比较了 6 种模拟对线技术与最终植入技术之间的滑车角(TA)、滑车过/欠填以及内外侧隐窝偏移,并进一步分析了术前冠状对线对滑车位置的影响。采用方差分析、Welch 检验或 Wilcoxon 秩和检验(Bonferroni 校正)进行比较。
植入技术和模拟技术的 TA 均较原始滑车沟呈明显外翻(p<0.001)。植入技术、KA 和 rKA 与 GB、MA 和 riKA 相比更接近原始 TA(p>0.001)。所有对线理念均对原始滑车沟欠填。KA 和 rKA 比所有其他技术欠填少(p<0.001),而 GB 比所有其他技术欠填多(p<0.001)。在伸展位,所有技术均使滑车沟向外侧移位,而在屈曲位,使滑车沟向内侧移位。这些影响在 GB 和 MA 中最为明显。
与系统对线技术相比,当使用标准化股骨组件时,个性化对线技术(如 KA 和 rKA)考虑了个体解剖结构的差异,更能恢复原始髌骨沟。
III 级,回顾性研究。