BG Klinik Ludwigshafen, Department for Orthopaedics and Trauma Surgery, Clinic at Heidelberg University, Ludwig-Guttmann-Str. 13, 67071, Ludwigshafen, Germany.
Institute of Medical Biometry, University of Heidelberg, Heidelberg, Germany.
Arch Orthop Trauma Surg. 2024 Apr;144(4):1603-1609. doi: 10.1007/s00402-023-05181-6. Epub 2024 Mar 5.
Distal radioulnar joint (DRUJ) instabilities are challenging and their optimal treatment is controversial. In special cases or when reconstruction of the stabilizing triangular fibrocartilage complex (TFCC) fails, K-wire transfixation can be performed. However, no consensus has been reached regarding the rotational position of the forearm in which this should be done. Therefore, it was investigated whether anatomical reduction would best be achieved by transfixation in neutral position or supination of the forearm.
Twelve cadaveric upper limbs were examined before dissection of the DRUJ stabilizing ligaments and after closed transfixation in both positions by C-arm cone-beam CT. Whether this was first done in neutral position or in supination was randomized. The change in the radioulnar ratio (RR) in percentage points (%points) was analyzed using Student's t-test. RR was used since it is a common and sensitive method to evaluate DRUJ reduction, expressing the ulnar head's position in the sigmoid notch as a length ratio.
The analysis showed an increased change in RR in neutral position with 5.4 ± 9.7%points compared to fixation in supination with 0.2 ± 16.1%points, yet this was not statistically significant (p = 0.404).
Neither position leads to a superior reduction in general. However, the result was slightly closer to the anatomical position in supination. Thus, transfixation of the DRUJ should be performed in the position in which reduction could best be achieved and based on these data, that tends to be in supination. Further studies are necessary to validate these findings and to identify influential factors.
桡尺远侧关节(DRUJ)不稳定具有挑战性,其最佳治疗方法存在争议。在特殊情况下或三角纤维软骨复合体(TFCC)稳定重建失败时,可进行克氏针贯穿固定。然而,对于应该在何种前臂旋转位置下进行操作,尚未达成共识。因此,本研究旨在探讨在前臂中立位或旋前位下进行贯穿固定,哪种方式更有利于实现解剖复位。
12 具尸体上肢标本在解剖 DRUJ 稳定韧带之前进行检查,然后在 C 臂锥形束 CT 下分别于中立位和旋前位进行闭合性贯穿固定。贯穿固定首先在中立位还是旋前位下进行是随机的。采用 Student's t 检验分析桡尺比(RR)的百分比变化(%points)。选择 RR 是因为它是评估 DRUJ 复位的一种常用且敏感的方法,通过测量尺骨头在乙状切迹中的位置来表示长度比。
分析结果显示,中立位下 RR 的变化增加了 5.4±9.7%points,而旋前位下的变化仅为 0.2±16.1%points,但无统计学意义(p=0.404)。
两种位置都不能使复位效果显著提高。然而,在旋前位下,结果更接近解剖位置。因此,DRUJ 的贯穿固定应在最有利于复位的位置进行,根据这些数据,倾向于在旋前位下进行。还需要进一步的研究来验证这些发现并确定影响因素。