Babaei Robat Arsalan, Arezoo Keyvan, Alipour Khalil, Tarvirdizadeh Bahram
Advanced Service Robots (ASR) Laboratory, Department of Mechatronics Eng., Faculty of New Sciences and Technologies, University of Tehran, PO-Box 1439957131, Iran.
ISA Trans. 2024 May;148:45-63. doi: 10.1016/j.isatra.2024.03.004. Epub 2024 Mar 6.
To improve the payload capacity and maneuverability of a Differentially-Driven Wheeled Robot (DDWR), a wheeled vehicle, which is called trailer, is connected to the DDWR. In all of the previous studies of DDWRs with a trailer, the robot wheels are subject to pure rolling constraints. However, when these multibody systems move with high velocities/accelerations, transfer a heavy payload, or travel on a slippery surface, they experience slipping and/or skidding. In the present study, a Tractor-Trailer Wheeled Mobile Robot (TTWMR) is modeled whose wheels may slip in lateral and longitudinal directions. To this end, Lagrange formalism is employed along with the LuGre friction model to derive dynamics of the considered multibody system. Next, the problem of path following for the trailer is addressed. Toward this goal, the partial feedback linearization technique will be utilized. The obtained simulation results prove the superiority of the performance of the suggested method in comparison to the previous studies. Additionally, the response of the system in the presence of the external disturbances and uncertainties in system parameters will be examined.
为了提高差分驱动轮式机器人(DDWR)的 payload 容量和机动性,将一个被称为拖车的轮式车辆连接到 DDWR 上。在之前所有关于带拖车的 DDWR 的研究中,机器人轮子都受到纯滚动约束。然而,当这些多体系统高速/加速移动、搬运重物或在滑面上行驶时,它们会出现打滑和/或侧滑。在本研究中,对一种轮式移动机器人(TTWMR)进行建模,其轮子可能在横向和纵向方向上打滑。为此,采用拉格朗日形式主义并结合 LuGre 摩擦模型来推导所考虑的多体系统的动力学。接下来,解决拖车的路径跟踪问题。为了实现这一目标,将使用部分反馈线性化技术。所获得的仿真结果证明了所提方法在性能上优于先前的研究。此外,还将研究系统在存在外部干扰和系统参数不确定性情况下的响应。