Suppr超能文献

利用 3D 评估评估临床前牙科学生选择性龋齿去除实践:一项试点研究。

Utilization of 3D evaluation for assessing selective caries removal practice in pre-clinical dental students: a pilot study.

机构信息

College of Dentistry, National Yang Ming Chiao Tung University, Linong St, Beitou District, Taipei City, 112, Taiwan.

Faculty of Dentistry, Thammasat University, 99 M. 18, T. Klong Nueng, A. Klong Luang, Pathum Thani, 12120, Thailand.

出版信息

BMC Med Educ. 2024 Mar 15;24(1):289. doi: 10.1186/s12909-024-05296-3.

Abstract

BACKGROUND

Practicing and assessment of selective caries removal techniques in dental students remain challenges in many dental schools. The aim of this study was to utilize a 3D assessment technique, within a designated acceptable range of deviation, to evaluate the tendency of dental students in performing selective caries removal (SCR). The correlation between 3D assessment results and the conventional rubric rated by an instructor was also determined.

METHODS

Fifth-year dental students (n = 61) performed the SCR task on 3D-printed teeth containing simulated deep caries lesions in occlusal and proximal surfaces. One instructor assessed the results using a conventional analytic rubric. The excavated teeth were additionally evaluated using 3D analysis software with the designated acceptable range of deviations (± 0.5 mm) from the standard cavities. The average root mean square (RMS) value, representing the deviation between student-prepared cavities and the predefined standard cavities, was recorded. A tendency towards over-excavation was defined for RMS values > 0.5 mm, and towards under-excavation for RMS values < 0.5 mm.

RESULTS

The mean (min-max) of RMS was 0.27 (0.18-0.40) for occlusal and 0.29 (0.20-0.57)for proximal cavities. A tendency of dental students toward over-excavation was observed in both occlusal (74%) and proximal cavities (87%). There was a moderate negative correlation between the RMS values and the traditional rubric scores for both occlusal (R = 0.148, P = 0.002) and proximal cavities (R = 0.107, P = 0.010).

CONCLUSIONS

The 3D evaluation technique effectively revealed specific tendencies in dental students' caries removal skills. The integration of computerized assessments with traditional methods could potentially assist the instructors in delivering more objective and specific feedback to students. Further research is encouraged to investigate the impact of this assessment technique on improving student performance in selective caries removal skills.

摘要

背景

在许多牙科学院,学生实践和评估选择性去龋技术仍然具有挑战性。本研究旨在利用 3D 评估技术,在指定的可接受偏差范围内,评估牙科学生进行选择性去龋(SCR)的倾向。还确定了 3D 评估结果与教师评分的传统量表之间的相关性。

方法

五年级牙科学生(n=61)在 3D 打印的牙齿上进行 SCR 任务,这些牙齿的咬合面和近中面含有模拟的深龋损。一位教师使用传统的分析量表对结果进行评估。使用指定的可接受偏差范围(±0.5mm)从标准腔的 3D 分析软件对挖掘的牙齿进行另外评估。记录代表学生准备的腔与预定义标准腔之间偏差的平均均方根(RMS)值。RMS 值>0.5mm 定义为过度挖掘倾向,RMS 值<0.5mm 定义为挖掘不足倾向。

结果

咬合面 RMS 的平均值(最小值-最大值)为 0.27(0.18-0.40),近中面 RMS 的平均值为 0.29(0.20-0.57)。在咬合面(74%)和近中面(87%)都观察到学生倾向于过度挖掘。咬合面(R=0.148,P=0.002)和近中面(R=0.107,P=0.010)的 RMS 值与传统量表评分之间存在中度负相关。

结论

3D 评估技术有效地揭示了学生龋病去除技能的特定倾向。将计算机评估与传统方法相结合,可能有助于教师为学生提供更客观和具体的反馈。鼓励进一步研究以调查这种评估技术对提高学生选择性龋病去除技能的影响。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/02f0/10941383/e8ca849c2b90/12909_2024_5296_Fig1_HTML.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验