Department of Orthopaedics, Faculty of Medicine, King Chulalongkorn Memorial Hospital, Chulalongkorn University, Bangkok, Thailand.
Department of Orthopaedics, Faculty of Medicine, Vajira Hospital, Navamindradhiraj University, Bangkok, Thailand.
J Hand Surg Asian Pac Vol. 2024 Apr;29(2):140-147. doi: 10.1142/S2424835524500164. Epub 2024 Mar 15.
The long axis of the radius is a standard reference for measuring radiological parameters in distal radius fractures. However, in patients with severe comminution and anatomical variation with distal radius bowing, it is challenging to assess using the long axis of the radius. The long axis of the ulna can be used as an alternative reference. The aim of this study is to assess the reliability and level of agreement using the long axis of the ulna as an alternative reference in comparison to the long axis of the radius. Posteroanterior (PA) radiography of the wrist in patients with acute distal radius fractures was evaluated in two rounds by four observers. Radial height, radial inclination and ulnar variance were measured using radial and ulnar long axis as references. The intraobserver and interobserver reliability of the measurements with two reference axes was assessed using intraclass correlation coefficient (ICC). The level of agreement was determined using the Bland-Altman plot. In total, 59 patients who underwent PA radiography of the wrist were included in this study. All parameters exhibited good agreement between the two methods, with a mean difference of nearly zero (radial height = -0.03 mm, radial inclination = -0.14° and ulnar variance = 0.03 mm). The limits of agreement in radial height (-2.87, 2.82 mm) and ulnar variance (-0.81, 0.87 mm) were narrow. However, for the radial inclination, it was wider (-6.21, 5.94°). Intraobserver reliability between the long axis of radius and ulna (ICC = 0.85-0.99 and 0.84-0.98, respectively) was good to excellent. The interobserver reliability of each parameter was excellent (ICC = 0.94-0.97). The ulnar long axis can be used as an alternative reference for measuring radial height, radial inclination and ulnar variance in PA radiography of the wrist in acute distal radius fracture, particularly if the radial long axis is distorted. Level III (Diagnostic).
桡骨的长轴是测量桡骨远端骨折放射学参数的标准参考。然而,在严重粉碎和桡骨远端弯曲的解剖变异患者中,使用桡骨长轴评估具有挑战性。可以使用尺骨长轴作为替代参考。本研究的目的是评估使用尺骨长轴作为替代参考与桡骨长轴相比的可靠性和一致性水平。 对 59 例急性桡骨远端骨折患者的腕关节后前位(PA)X 线片进行了两轮评估,由 4 名观察者进行。使用桡骨和尺骨长轴作为参考测量桡骨高度、桡骨倾斜度和尺骨差异。使用组内相关系数(ICC)评估两种参考轴测量的组内和组间可靠性。使用 Bland-Altman 图确定一致性水平。 两种方法的所有参数均具有良好的一致性,平均差值接近零(桡骨高度= -0.03mm,桡骨倾斜度= -0.14°,尺骨差异= 0.03mm)。桡骨高度(-2.87, 2.82mm)和尺骨差异(-0.81, 0.87mm)的界限较窄。然而,对于桡骨倾斜度,其范围较宽(-6.21, 5.94°)。桡骨长轴和尺骨长轴之间的组内可靠性(ICC=0.85-0.99 和 0.84-0.98)良好至优秀。每个参数的组间可靠性均为优秀(ICC=0.94-0.97)。 在急性桡骨远端骨折的腕关节 PA 放射学中,尺骨长轴可作为测量桡骨高度、桡骨倾斜度和尺骨差异的替代参考,特别是当桡骨长轴变形时。 三级(诊断)。