Atak Ay Buse, Türker Şebnem Begüm
Int J Comput Dent. 2025 Jun 27;28(2):141-149. doi: 10.3290/j.ijcd.b5117207.
The aim of the present study was to examine the color stability of laminate veneer restorations fabricated with various CAD/CAM materials applied to bleached teeth.
Eighty maxillary central incisors extracted due to periodontal, orthodontic, or trauma problems were used. The teeth were embedded in acrylic blocks and divided into eight groups (n = 10). Groups A, B, C, and D were bleached with a vital bleaching agent before preparation, and the teeth were prepared for laminate veneer restorations. Groups E, F, G, and H were prepared without bleaching. Groups A and E were restored with GC Initial LiSi HT Blocks A1, Groups B and F with GC Initial LiSi LT Blocks A1, Groups C and G with IPS e.max CAD HT Blocks A1, and Groups D and H with IPS e.max CAD LT Blocks A1. All restorations were adhesively cemented and aged for 2 and 5 years with thermal cycling. Color measurements of the restorations were taken with a spectrophotometer at baseline and after 2 and 5 years of aging.
Teeth in all the bleached groups showed more color changes than those in the unbleached groups. After 2 years of aging, the least color change was observed with GC Initial LiSi LT (ΔE00 = 0.808) and IPS e.max CAD LT (ΔE00 = 0.813) materials, which were used on unbleached teeth, and the most color change was observed with GC Initial LiSi HT (ΔE00 = 0.934) and IPS e.max CAD HT (ΔE00 = 0.923) materials, which were used on bleached teeth. After 5 years of aging, the least color change was observed with IPS e.max CAD LT (ΔE00 = 0.831) and GC Initial LiSi LT (ΔE00 = 0.839) materials, which were used on unbleached teeth, and the most color change was observed with GC Initial LiSi HT (ΔE00 = 0.957) and IPS e.max CAD HT (ΔE00 = 0.938) materials, which were used on bleached teeth.
Bleaching and translucency affect color stability. No difference was detected between the color changes of GC Initial LiSi and IPS e.max CAD materials. The increase in aging time increased the color changes of all materials.
Bleaching and laminate veneer restorations may be preferred in many patients. For this reason, the long-term color changes of laminate veneer restorations applied to bleached teeth is clinically very relevant. The present study aimed to evaluate the effect of tooth bleaching on the long-term color stability of laminate veneer restorations fabricated with various CAD/CAM materials of different translucencies.
本研究的目的是检测应用于漂白牙齿的各种CAD/CAM材料制作的贴面修复体的颜色稳定性。
使用因牙周、正畸或外伤问题拔除的80颗上颌中切牙。将牙齿嵌入丙烯酸块中,分为八组(n = 10)。A、B、C和D组在预备前用活髓漂白剂进行漂白,然后对牙齿进行贴面修复体预备。E、F、G和H组未进行漂白直接预备。A组和E组用GC Initial LiSi HT Blocks A1修复,B组和F组用GC Initial LiSi LT Blocks A1修复,C组和G组用IPS e.max CAD HT Blocks A1修复,D组和H组用IPS e.max CAD LT Blocks A1修复。所有修复体均采用粘结剂粘结,并通过热循环老化2年和5年。在基线以及老化2年和5年后,用分光光度计对修复体进行颜色测量。
所有漂白组的牙齿比未漂白组的牙齿颜色变化更大。老化2年后,未漂白牙齿上使用的GC Initial LiSi LT(ΔE00 = 0.808)和IPS e.max CAD LT(ΔE00 = 0.813)材料颜色变化最小,漂白牙齿上使用的GC Initial LiSi HT(ΔE00 = 0.934)和IPS e.max CAD HT(ΔE00 = 0.923)材料颜色变化最大。老化5年后,未漂白牙齿上使用的IPS e.max CAD LT(ΔE00 = 0.831)和GC Initial LiSi LT(ΔE00 = 0.839)材料颜色变化最小,漂白牙齿上使用的GC Initial LiSi HT(ΔE00 = 0.957)和IPS e.max CAD HT(ΔE00 = 0.938)材料颜色变化最大。
漂白和透明度会影响颜色稳定性。未检测到GC Initial LiSi和IPS e.max CAD材料的颜色变化之间存在差异。老化时间的增加会使所有材料的颜色变化增大。
漂白和贴面修复体在许多患者中可能是首选。因此,应用于漂白牙齿的贴面修复体的长期颜色变化在临床上非常重要。本研究旨在评估牙齿漂白对用不同透明度的各种CAD/CAM材料制作的贴面修复体长期颜色稳定性的影响。