IEEE Trans Ultrason Ferroelectr Freq Control. 2024 May;71(5):607-620. doi: 10.1109/TUFFC.2024.3381451. Epub 2024 May 10.
Existing data on the acoustic properties of low-temperature biological materials is limited and widely dispersed across fields. This makes it difficult to employ this information in the development of ultrasound applications in the medical field, such as cryosurgery and rewarming of cryopreserved tissues. In this review, the low-temperature acoustic properties of biological materials, and the measurement methods used to acquire them were collected from a range of scientific fields. The measurements were reviewed from the acoustic setup to thermal methodologies for samples preparation, temperature monitoring, and system insulation. The collected data contain the longitudinal and shear velocity, and attenuation coefficient of biological soft tissues and biologically relevant substances-water, aqueous solutions, and lipids-in the temperature range down to -50 °C and in the frequency range from 108 kHz to 25 MHz. The multiple reflection method (MRM) was found to be the preferred method for low-temperature samples, with a buffer rod inserted between the transducer and sample to avoid direct contact. Longitudinal velocity changes are observed through the phase transition zone, which is sharp in pure water, and occurs more slowly and at lower temperatures with added solutes. Lipids show longer transition zones with smaller sound velocity changes; with the longitudinal velocity changes observed during phase transition in tissues lying between these two extremes. More general conclusions on the shear velocity and attenuation coefficient at low-temperatures are restricted by the limited data. This review enhance knowledge guiding for further development of ultrasound applications in low-temperature biomedical fields, and may help to increase the precision and standardization of low-temperature acoustic property measurements.
关于低温生物材料的声学特性的现有数据是有限的,并且在各个领域广泛分散。这使得难以在医学领域的超声应用的开发中利用这些信息,例如冷冻手术和冷冻保存组织的复温。在这篇综述中,从多个科学领域收集了生物材料的低温声学特性及其获取这些特性的测量方法。从声学设置到用于样品制备、温度监测和系统隔热的热方法,对测量进行了回顾。收集的数据包含生物软组织和与生物相关的物质(水、水溶液和脂质)的纵波和横波速度以及衰减系数,温度范围可达-50°C,频率范围从 108 kHz 到 25 MHz。发现多次反射法(MRM)是低温样品的首选方法,在换能器和样品之间插入缓冲棒以避免直接接触。在纯水中,通过相变区观察到纵波速度的变化,在添加溶质时,相变区更缓慢且温度更低。脂质具有更长的相变区和更小的声速变化;在组织的相变过程中观察到的纵波速度变化介于这两个极端之间。更普遍的关于低温下剪切速度和衰减系数的结论受到有限数据的限制。本综述增强了低温生物医学领域超声应用进一步发展的指导知识,并可能有助于提高低温声学特性测量的精度和标准化。