Design method for eliminating spectral line tilt in a multiple sub-pupil ultra-spectral imager (MSPUI).

A multiple sub-pupil ultra-spectral imaging system designed with a single spectrometer and detector can simultaneously detect multiple-channel spectra with ultra-high spectral resolution. However, due to using a prism in the system's front end, the nonlinear dispersion introduces spectral line tilt in the imaging spectra. This phenomenon can lead to bias in the final spectral data. To eliminate this issue, we propose a new design by introducing a second prism to correct this spectral tilt in the system. The angle of spectral line tilt generated by the nonlinear dispersion of the first prism is derived. It provides the theoretical basis for characterizing the second complementary prism. Finally, a UV multiple sub-pupil ultra-spectral imaging system is designed. The system employs two pupil separation prisms and one flat panel array to segment the pupil in three channels, each operating within spectral ranges of 180∼210 nm, 275∼305 nm, and 370∼400 nm, respectively. The spectral resolutions in all three channels are better than 0.1 nm. The corrected spectral line tilt is less than 1/3 of a pixel in the two channels with pupil separation prisms. At a Nyquist frequency of 30 lp/mm, the modulation transfer functions of all three channels are greater than 0.7, ensuring imaging quality. The design results indicate that the method proposed in this paper, utilizing complementary prisms, can effectively correct the spectral line tilt caused by the nonlinear dispersion of the pupil separation prisms. This design approach can be a reference for developing multiple sub-pupil ultra-spectral imaging systems.