Soil Physics and Land Management Group, Wageningen University & Research, Droevendaalsesteeg 3, 6708PB Wageningen, the Netherlands.
Soil Physics and Land Management Group, Wageningen University & Research, Droevendaalsesteeg 3, 6708PB Wageningen, the Netherlands.
Sci Total Environ. 2024 Jun 1;927:172175. doi: 10.1016/j.scitotenv.2024.172175. Epub 2024 Apr 2.
The use of plastic mulch films in agriculture leads to the inevitable accumulation of plastic debris in soils. Here, we explored the potential of earthworm gut-inhabiting bacterial strains (Mycobacterium vanbaalenii (MV), Rhodococcus jostii (RJ), Streptomyces fulvissimus (SF), Bacillus simplex (BS), and Sporosarcina globispora (SG) to degrade plastic films (⌀ = 15 mm) made from commonly used polymers: low-density polyethylene film (LDPE-f), polylactic acid (PLA-f), polybutylene adipate terephthalate film (PBAT-f), and a commercial biodegradable mulch film, Bionov-B® (composed of Mater-Bi, a feedstock with PBAT, PLA and other chemical compounds). A 180-day experiment was conducted at room temperature (x̄ =19.4 °C) for different strain-plastic combinations under a low carbon media (0.1× tryptic soy broth). Results showed that the tested strain-plastic combinations did not facilitate the degradation of LDPE-f (treated with RJ and SF), PBAT-f (treated with BS and SG), and Bionov-B (treated with BS, MV, and SG). However, incubating PLA-f with SF triggered a reduction in the molecular weights and an increase in crystallinity. Therefore, we used PLA-f as model plastic to study the influence of temperature ("room temperature" & "30 °C"), carbon source ("carbon-free" & "low carbon supply"), and strain interactions ("single strains" & "strain mixtures") on PLA degradation. SF and SF + RJ treatments significantly fostered PLA degradation under 30 °C in a low-carbon media. PLA-f did not show any degradation in carbon-free media treatments. The competition between different strains in the same system likely hindered the performance of PLA-degrading strains. A positive correlation between the final pH of culture media and PLA-f weight loss was observed, which might reflect the pH-dependent hydrolysis mechanism of PLA. Our results situate SF and its co-culture with RJ strains as possible accelerators of PLA degradation in temperatures below PLA glass transition temperature (T). Further studies are needed to test the bioremediation feasibility in soils.
在农业中使用塑料地膜会导致土壤中不可避免地积累塑料碎片。在这里,我们探索了蚯蚓肠道内细菌菌株(分枝杆菌(MV)、约氏黄杆菌(RJ)、绛红密旋链霉菌(SF)、短小芽孢杆菌(BS)和球形节杆菌(SG))降解常用聚合物制成的塑料薄膜(直径=15 毫米)的潜力:低密度聚乙烯薄膜(LDPE-f)、聚乳酸(PLA-f)、聚丁二酸丁二醇酯薄膜(PBAT-f)和一种商业可生物降解地膜,Bionov-B®(由 Mater-Bi 组成,一种含有 PBAT、PLA 和其他化合物的原料)。在室温(平均值=19.4°C)下,在低碳培养基(0.1×胰蛋白酶大豆肉汤)下进行了为期 180 天的不同菌株-塑料组合实验。结果表明,测试的菌株-塑料组合并没有促进 LDPE-f(用 RJ 和 SF 处理)、PBAT-f(用 BS 和 SG 处理)和 Bionov-B(用 BS、MV 和 SG 处理)的降解。然而,用 SF 孵育 PLA-f 会导致分子量降低和结晶度增加。因此,我们使用 PLA-f 作为模型塑料来研究温度(“室温”和“30°C”)、碳源(“无碳”和“低碳供应”)和菌株相互作用(“单一菌株”和“菌株混合物”)对 PLA 降解的影响。SF 和 SF+RJ 处理在低碳培养基中 30°C 下显著促进 PLA 降解。PLA-f 在无碳培养基处理中没有任何降解。同一系统中不同菌株之间的竞争可能阻碍了 PLA 降解菌株的性能。观察到培养基的最终 pH 值与 PLA-f 重量损失之间存在正相关,这可能反映了 PLA 的 pH 依赖性水解机制。我们的结果表明,SF 及其与 RJ 菌株的共培养可能是 PLA 降解的加速剂,温度低于 PLA 玻璃化转变温度(T)。需要进一步的研究来测试土壤中的生物修复可行性。