Where is the gap after a 90 W/4 s very-high-power short-duration ablation of atrial fibrillation?: Association with the left atrial-pulmonary vein voltage and wall thickness.

BACKGROUND

Although pulmonary vein isolation (PVI) for atrial fibrillation (AF) utilizing radiofrequency (RF) applications with a very high-power and short-duration (vHPSD) has shortened the procedure time, the determinants of pulmonary vein (PV) gaps in the first-pass PVI and acute PV reconnections are unclear.

METHODS

An extensive encircling PVI was performed with the QDOT MICRO catheter with a vHPSD (90 W-4 s) in 30 patients with AF (19 men, 64 ± 10 years). The association of the PV gap sites (first-pass PVI failure, acute PV reconnections [spontaneous reconnections or dormant conduction provoked by adenosine triphosphate] or both) with the left atrial (LA) wall thickness and LA bipolar voltage on the PVI line and ablation-related parameters were assessed.

RESULTS

PV gaps were observed in 29 (6%) of 480 segments (16 segments per patient) in 17 patients (56%). The PV gaps were associated with the LA wall thickness, bipolar voltage, and the number of RF points (LA wall thickness, 2.5 ± 0.5 vs. 1.9 ± 0.4 mm,  < .001; bipolar voltage, 2.59 ± 1.62 vs. 1.34 ± 1.14 mV,  < .001; RF points, 6 ± 2 vs. 4 ± 2,  = .008) but were not with the other ablation-related parameters. Receiver operating characteristic curves yielded that an LA wall thickness ≥2.3 mm and bipolar voltage ≥2.40 mV were determinants of PV gaps with an area under the curve of 0.82 and 0.73, respectively.

CONCLUSIONS

The LA voltage and wall thickness on the PV-encircling ablation line were highly associated with PV gaps using the 90 W/4 s-vHPSD ablation.