Kahramansoy Nurettin
Department of Surgery, İzmir Bozyaka Education and Research Hospital, İzmir, Turkiye.
GMS Hyg Infect Control. 2024 Mar 5;19:Doc14. doi: 10.3205/dgkh000469. eCollection 2024.
The use of devices for tissue dissection and hemostasis during surgery is almost unavoidable. Electrically powered devices such as electrocautery, ultrasonic and laser units produce surgical smoke containing more than a thousand different products of combustion. These include large amounts of carcinogenic, mutagenic and potentially teratogenic noxae. The smoke contains particles that range widely in size, even as small as 0.007 µm. Most of the particles (90%) in electrocautery smoke are ≤6.27 µm in size, but surgical masks cannot filter particles smaller than 5 µm. In this situation, 95% of the smoke particles which pass through the mask reach deep into the respiratory tract and frequently cause various symptoms, such as headache, dizziness, nausea, eye and respiratory tract irritation, weakness, and abdominal pain in the acute period. The smoke can transport bacteria and viruses that are mostly between 0.02 µm and 3 µm in size and there is a risk of contamination. Among these viruses, SARS-CoV-2, influenza virus, HIV, HPV, HBV must be considered. The smoke may also carry malignant cells. The long-term effects of the surgical smoke are always ignored, because causality can hardly be clarified in individual cases. The quantity of the smoke changes with the technique of the surgeon, the room ventilation system, the characteristics of the power device used, the energy level at which it is set, and the characteristics of the tissue processed. The surgical team is highly exposed to the smoke, with the surgeon experiencing the highest exposure. However, the severity of exposure differs according to certain factors, e.g., ventilation by laminar or turbulent mixed airflow or smoke evacuation system. In any case, the surgical smoke must be removed from the operation area. The most effective method is to collect the smoke from the source through an aspiration system and to evacuate it outside. Awareness and legal regulations in terms of hygiene, toxicology, as well as occupational health and safety should increase.
手术过程中使用组织切割和止血设备几乎是不可避免的。电灼、超声和激光等电动设备会产生含有一千多种不同燃烧产物的手术烟雾。这些产物包括大量致癌、致突变和潜在致畸有害物质。烟雾中含有大小范围广泛的颗粒,甚至小至0.007微米。电灼烟雾中的大多数颗粒(90%)尺寸≤6.27微米,但外科口罩无法过滤小于5微米的颗粒。在这种情况下,95%穿过口罩的烟雾颗粒会深入呼吸道,并经常在急性期引起各种症状,如头痛、头晕、恶心、眼睛和呼吸道刺激、虚弱和腹痛。烟雾可以传播大小大多在0.02微米至3微米之间的细菌和病毒,存在污染风险。在这些病毒中,必须考虑新型冠状病毒、流感病毒、艾滋病毒、人乳头瘤病毒、乙肝病毒。烟雾也可能携带恶性细胞。手术烟雾的长期影响一直被忽视,因为在个别病例中很难厘清因果关系。烟雾的量会随着外科医生的技术、房间通风系统、所使用的动力设备的特性、其设置的能量水平以及所处理组织的特性而变化。手术团队高度暴露于烟雾中,外科医生暴露程度最高。然而,暴露的严重程度因某些因素而异,例如层流或湍流混合气流通风或烟雾抽吸系统。无论如何,必须将手术烟雾从手术区域清除。最有效的方法是通过抽吸系统从源头收集烟雾并将其排放到室外。在卫生、毒理学以及职业健康与安全方面的意识和法律法规应该增强。