Molina-Hernández Junior Bernardo, Andrade-Mahecha Margarita Maria, Martínez-Correa Hugo Alexander
Departamento de Ingeniería, Facultad de Ingeniería y Administración, Universidad Nacional de Colombia, Palmira, Valle del Cauca, Colombia.
Department of Agricultural and Food Sciences, University of Bologna, Cesena, Italy.
Food Sci Technol Int. 2024 Apr 30:10820132241248675. doi: 10.1177/10820132241248675.
In recent years, people have become interested in consuming low-fat foods as this reduces the risk of obesity and cardiovascular disease. For this reason, this study optimized the incorporation of passion fruit epicarp (PFE) as a partial fat substitute in dairy ice cream. For this purpose, a central composite rotational design 2 was performed and 5 response variables were optimized, of which 4 variables were maximized (percentage overrun, hardness, adhesiveness, and color coordinates *, *, *), while the melting rate was minimized as a function of two factors (% PFE and % fat). The stability of three types of ice cream was then evaluated: experimental ice cream (3% milk fat and 0.97% PFE), commercial ice cream (4% milk fat and 2% vegetable fat) and control ice cream (3% milk fat without PFE added), according to their physicochemical and sensory properties during 57 days of storage (-22 °C, 85% relative humidity). The results showed that it was possible to reduce the milk fat by up to 25% by adding PFE (0.97%), which significantly reduced the melting rate and resulted in higher hardness (N), adhesiveness and increased yellowness compared to the commercial samples. The optical microscopy analysis also showed that PFE keeps the air bubbles immobile due to the increased viscosity in the serum phase during the 57-day storage.
近年来,人们开始热衷于食用低脂食品,因为这能降低肥胖和心血管疾病的风险。基于此,本研究优化了西番莲果皮(PFE)作为部分脂肪替代品在乳制冰淇淋中的添加量。为此,进行了中心复合旋转设计2,并对5个响应变量进行了优化,其中4个变量最大化(膨胀率、硬度、粘附性和色坐标*、、),而融化速率作为两个因素(PFE百分比和脂肪百分比)的函数被最小化。然后根据三种类型冰淇淋在57天储存期(-22°C,85%相对湿度)内的理化和感官特性,对实验冰淇淋(3%乳脂肪和0.97%PFE)、商业冰淇淋(4%乳脂肪和2%植物脂肪)和对照冰淇淋(3%乳脂肪且未添加PFE)的稳定性进行了评估。结果表明,通过添加PFE(0.97%),乳脂肪含量可降低高达25%,这显著降低了融化速率,与商业样品相比,硬度(N)、粘附性更高,黄色度增加。光学显微镜分析还表明,在57天的储存期内,由于血清相粘度增加,PFE使气泡保持不动。