Impact of air quality on the health of present-day workers in an Asbestos roof manufacturing industry, Sri Lanka.

The study's objective was to determine the air quality in an asbestos-related industry and its impact on current workers' respiratory health. Seventy-seven air and 65 dust samples were collected at 5-day intervals in an asbestos roofing sheets production factory in Sri Lanka having two production facilities. Sampling was performed in ten sites: Defective sheets-storage, Production-plant, Pulverizer, Cement-silo, and Loading-area. A detailed questionnaire and medical screening were conducted on 264 workers, including Lung Function Tests (LFT) and chest X-rays. Asbestos fibres were observed in deposited dust samples collected from seven sites. Free chrysotile fibres were absent in the breathing air samples. Scanning Electron Microscopy confirmed the presence of asbestos fibres, and the Energy Dispersive X-ray analysis revealed Mg, O, and Si in depositions. The average concentrations of trace metals were Cd-2.74, Pb-17.18, Ni-46.68, Cr-81.01, As-7.12, Co-6.77, and Cu-43.04 mg/kg. The average Zn, Al, Mg, and Fe concentrations were within 0.2-163 g/kg. The highest concentrations of PM2.5 and PM10, 258 and 387 µg/m, respectively, were observed in the Pulverizer site. Forty-four workers had respiratory symptoms, 64 presented LFT abnormalities, 5 indicated chest irregularities, 35.98% were smokers, and 37.5% of workers with abnormal LFT results were smokers. The correlation coefficients between LFT results and work duration with respiratory symptoms and work duration and chest X-ray results were 0.022 and 0.011, respectively. In conclusion, most pulmonary disorders observed cannot directly correlate to Asbestos exposure due to negligible fibres in breathing air, but fibres in the depositions and dust can influence the pulmonary health of the employees.