Comba Allegra, Baldi Andrea, Pucci Riccardo, Rolando Chiara, Alovisi Mario, Pasqualini Damiano, Scotti Nicola
Department of Surgical Sciences, Dental School Lingotto, University of Turin, 10100 Turin, Italy.
J Clin Med. 2024 Apr 24;13(9):2474. doi: 10.3390/jcm13092474.
(1) : The objective of this in vitro study was to evaluate the impact of different etching times and ethanol pre-treatments on the immediate bond strength of a hydrophilic multi-mode universal adhesive (Clearfil Universal Bond Quick, Kuraray, UBQ) and on the consequent gelatinolytic activity of metalloproteinases (MMPs) on radicular dentin. (2) : Sixty single-root teeth were selected and divided into four groups according to the adhesive protocol applied for fiber post cementation: (G1) 15 s HPO application + UBQ; (G2) 30 s HPO application + UBQ; (G3) 15 s HPO application + ethanol pre-treatment + UBQ; (G4) 30 s HPO + ethanol pre-treatment + UBQ. After adhesive procedures, fiber posts were luted into the post space with a dual-curing cement (DC Core, Kuraray) and light-cured for 40 s. To perform the push-out test and nanoleakage analyses for both coronal end apical areas, 1 mm slices were prepared, following a 24 h storage period in artificial saliva. Additionally, an in situ zymographic assay was conducted to explore endogenous MMP activity within the radicular layer. Results were statistically analyzed with ANOVA and Tukey post hoc tests. Statistical significance was set at < 0.05. (3) : ANOVA revealed a statistically significant difference in push-out bond strength related to the pre-treatment variable but did not highlight any significance of etching time. Specimens pre-treated with ethanol wet bond application showed higher bond strength ( < 0.01). In situ zymography quantification analyses revealed that all tested groups, independently of etching time end ethanol pre-treatment, activated MMP gelatinolytic activity. A significant increase in MMP activity was detected for the 30 s etching time. However, ETOH pre-treatment significantly reduced MMP activity within the adhesive interface ( < 0.01). (4) : The tested adhesive showed similar results regardless of the etching time protocol. The gelatinolytic activity of MMPs was observed in all the groups. Further investigations and extended follow-ups are required to validate the results of the present study in vivo.
(1):本体外研究的目的是评估不同酸蚀时间和乙醇预处理对亲水性多模式通用粘结剂(可乐丽Clearfil通用快速粘结剂,UBQ)的即时粘结强度以及对牙根牙本质中金属蛋白酶(MMPs)随后的明胶溶解活性的影响。(2):选取60颗单根牙,根据纤维桩粘结所应用的粘结方案分为四组:(G1)15秒磷酸(HPO)酸蚀+UBQ;(G2)30秒HPO酸蚀+UBQ;(G3)15秒HPO酸蚀+乙醇预处理+UBQ;(G4)30秒HPO+乙醇预处理+UBQ。粘结操作完成后,用双固化树脂水门汀(可乐丽DC Core)将纤维桩粘结到桩道内,并光照固化40秒。在人工唾液中储存24小时后,制备1毫米厚的切片,对冠方和根尖区域进行推出试验和纳米渗漏分析。此外,进行原位酶谱分析以探究牙根层内源性MMP活性。结果采用方差分析(ANOVA)和Tukey事后检验进行统计学分析。统计学显著性设定为P<0.05。(3):方差分析显示,与预处理变量相关的推出粘结强度存在统计学显著差异,但未突出酸蚀时间的任何显著性。乙醇湿粘结预处理的标本显示出更高的粘结强度(P<0.01)。原位酶谱定量分析表明,所有测试组,无论酸蚀时间和乙醇预处理如何,均激活了MMP的明胶溶解活性。酸蚀30秒时检测到MMP活性显著增加。然而,乙醇预处理显著降低了粘结界面内的MMP活性(P<0.01)。(4):无论酸蚀时间方案如何,所测试的粘结剂均显示出相似的结果。所有组均观察到MMP的明胶溶解活性。需要进一步的研究和长期随访以在体内验证本研究的结果。