A numerical study on machine-learning-based ultrasound tomography of bubbly two-phase flows.

Ultrasound tomography (UT) of bubbly two-phase flows using machine learning (ML) was investigated by performing two-dimensional ultrasound numerical simulations using a finite element method simulator. Studies on UT for two-phase flow measurements have been conducted only for some bubbles. However, in an actual bubbly flow, numerous bubbles are complexly distributed in the cross-section of the flow channel. This limitation of previous studies originates from the transmission characteristics of ultrasound waves through a medium. The transmission characteristics of ultrasound waves differ from those of other probe signals, such as radiation, electrical, and optical signals. This study evaluated the feasibility of combining UT with ML for predicting dense bubble distributions with up to 20 bubbles (cross-sectional average void fraction of approximately 0.29). We investigated the effects of the temporal length of the received waveform and the number of sensors to optimize the system on the prediction performance of the bubble distribution. The simultaneous driving of the installed sensors was simulated to reduce the measurement time for the entire cross-section and verify the method's applicability. Thus, it was confirmed that UT using ML has sufficient prediction performance, even for a complex bubble distribution with many bubbles, and that the cross-sectional average void fraction can be predicted with high accuracy.