Suppr超能文献

与真空成型、粘结和快速原型保持器相关的治疗后稳定性、存活时间和牙周健康:一项前瞻性临床研究。

Post-treatment stability, survival time and periodontal health associated with vacuum-formed, bonded and rapid prototype retainers: A prospective clinical study.

作者信息

Murugaiyan Sureka, Pottipalli Sathyanarayana Haritha, Thakkar Digant, Padmanabhan Sridevi

机构信息

Department of Orthodontics and Dentofacial Orthopaedics, Sri Ramachandra Dental College and Hospital, Sri Ramachandra Institute of Higher Education and Research, Chennai, India.

Private Practice Silver Smile Dental Specialists, Product Specialist Digant's 3D Orthodontics, Rajkot, Gujarat, India.

出版信息

J Orthod. 2025 Jun;52(2):150-161. doi: 10.1177/14653125241255702. Epub 2024 Jun 10.

Abstract

BACKGROUND

New technologies have paved the way for newer fabrication techniques, such as rapid prototyping, which has gained popularity in the fabrication of several orthodontic appliances including retainers.

AIM

To evaluate the stability, survival time and periodontal health associated with vacuum-formed retainers (VFRs), bonded retainers (BRs) and rapid prototype retainers (RPRs) over a period of 12 months in retention.

STUDY DESIGN

Prospective clinical study.

METHODS

A total of 72 participants completing fixed orthodontic treatment were allocated to the following three groups by the investigators based upon their initial malocclusion, compliance and preferences: VFR; BR; and RPR. The primary outcome was Little's Irregularity Index (LII). Other stability parameters, including arch length (AL), inter-canine width (ICW) and inter-molar width (IMW), were also assessed immediately after debonding (T0) and 12 months (T2) after debonding. In addition, survival time, calculus index and gingival index (GI) were assessed.

RESULTS

LII showed a significant difference ( = 0.00) between the groups and was increased in the VFR group (0.18 ± 0.22 mm) compared to the BR (0.03 ± 0.05 mm) and RPR (0.01 ± 0.03 mm) groups but was not clinically significant. The mean survival time of maxillary retainers was longest for the RPR group (220.63 days; 95% confidence interval [CI] = 194.1-247.16) but there was no significant difference between the three groups ( = 0.43). The mean survival time of mandibular retainers was higher and the same for the VFR and RPR groups (240 days; 95% CI = 240-240) and there was no significant difference between the three groups ( = 0.38). The calculus index score ( = 0.00) was statistically significant between the groups, with an increased score for the BR group (0.33 ± 0.27) compared to the VFR (0.07 ± 0.16) and RPR (0.13 ± 0.22) groups. Similarly, the GI score ( = 0.02) was statistically significant between the groups and was increased in the BR group (0.01 ± 0.19) compared to the VFR (-0.15 ± 0.18) and RPR (-0.06 ± 0.15) groups. The increase in calculus index and GI scores for the BR group were not clinically significant.

CONCLUSION

There were no clinically significant differences between the three retainer groups in terms of stability, periodontal health and time to failure.

摘要

背景

新技术为更新的制作技术铺平了道路,比如快速成型技术,该技术在包括保持器在内的多种正畸矫治器制作中已颇受欢迎。

目的

评估真空成型保持器(VFR)、粘结保持器(BR)和快速原型保持器(RPR)在保持12个月期间的稳定性、存留时间和牙周健康状况。

研究设计

前瞻性临床研究。

方法

72名完成固定正畸治疗的参与者,根据其初始错牙合情况、依从性和偏好,由研究者分为以下三组:VFR组;BR组;RPR组。主要观察指标为Little不规则指数(LII)。其他稳定性参数,包括牙弓长度(AL)、尖牙间宽度(ICW)和磨牙间宽度(IMW),也在拆除矫治器后即刻(T0)以及拆除矫治器12个月后(T2)进行评估。此外,还评估了存留时间、牙石指数和牙龈指数(GI)。

结果

LII在各组间存在显著差异(P = 0.00),与BR组(0.03±0.05mm)和RPR组(0.01±0.03mm)相比,VFR组(0.18±0.22mm)有所增加,但无临床意义。上颌保持器的平均存留时间以RPR组最长(220.63天;95%置信区间[CI]=194.1 - 247.16),但三组间无显著差异(P = 0.43)。下颌保持器的平均存留时间在VFR组和RPR组更高且相同(240天;95%CI = 240 - 240),三组间无显著差异(P = 0.

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验