Zhejiang Key Laboratory of Drinking Water Safety and Distribution Technology, Zhejiang University, Hangzhou, Zhejiang, 310058, PR China.
Environ Sci Pollut Res Int. 2024 Jun;31(30):42921-42930. doi: 10.1007/s11356-024-34005-2. Epub 2024 Jun 17.
The viewpoints on whether high concentrations of chloride ion (Cl) promote or inhibit the oxidation activity of activated persulfates are still inconclusive. Furthermore, the degradation of organic pollutants by the persulfates in the presence of high Cl concentrations without any activation medium has not yet been studied. In this work, the efficiency and mechanism of degradation of organic pollutants such as carbamazepine (CBZ), sulfadiazine (SDZ), and phenol (PN) by Cl-activated PMS (denoted as Cl/PMS) were investigated. Results showed that Cl could effectively activate PMS for the complete removal of CBZ, SDZ, and PN with reaction kinetic constants of 0.4516 min, 0.01753 min, and 0.06805 min, respectively. Parameters such as PMS dose, Cl concentration, solution pH, and initial concentrations of organic pollutants that affect the degradation efficiencies of the Cl/PMS process were optimized. Unlike conventional activated persulfates, it was confirmed that the free chlorine was the main active species in the Cl/PMS process. Finally, the degradation by-products of CBZ and SDZ as well as their toxicity were detected, and a possible degradation pathway for CBZ and SDZ was proposed. Though higher toxic chlorinated by-products were generated, the Cl/PMS process was still an efficient oxidation method for the removal of organic pollutants in aqueous solutions which contain high concentrations of Cl.
氯离子(Cl)浓度升高是促进还是抑制过硫酸盐的氧化活性,目前尚无定论。此外,在没有任何活化剂的情况下,高 Cl 浓度下过硫酸盐对有机污染物的降解尚未得到研究。在这项工作中,研究了 Cl 激活过一硫酸盐(Cl/PMS)降解卡马西平(CBZ)、磺胺嘧啶(SDZ)和苯酚(PN)等有机污染物的效率和机制。结果表明,Cl 可有效激活 PMS,使 CBZ、SDZ 和 PN 完全去除,反应动力学常数分别为 0.4516 min、0.01753 min 和 0.06805 min。优化了影响 Cl/PMS 过程降解效率的参数,如 PMS 剂量、Cl 浓度、溶液 pH 值和有机污染物的初始浓度。与传统的过硫酸盐活化不同,证实了自由氯是 Cl/PMS 过程中的主要活性物质。最后,检测了 CBZ 和 SDZ 的降解产物及其毒性,并提出了 CBZ 和 SDZ 的可能降解途径。尽管生成了更高毒性的氯化副产物,但 Cl/PMS 工艺仍然是一种高效的氧化方法,可用于去除含有高浓度 Cl 的水溶液中的有机污染物。