Jung Yongseok, Park Sanghyuk, Lee Sang Seok, Kim Shin-Hyun
Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, 34141, Republic of Korea.
Functional Composite Materials Research Center, Institute of Advanced Composite Materials Korea Institute of Science and Technology (KIST), Jeonbuk, 55324, Republic of Korea.
Small. 2024 Oct;20(43):e2402887. doi: 10.1002/smll.202402887. Epub 2024 Jun 19.
Attractive depletion interactions are utilized to organize colloidal particles into crystalline arrays with high crystallinity through spontaneous phase separation. However, uncontrolled nucleation frequently leads to the formation of crystalline grains with varied crystal orientations, which hampers the optical performance of photonic crystals. Here, colloidal crystals have been engineered with uniform orientation and high surface coverage by applying centrifugal force during the depletion-induced assembly of polystyrene particles. The centrifugal force encourages the particles to move toward the bottom surface, which fosters heterogeneous nucleation and supports rapid crystal growth, yielding densely-packed and uniformly-arranged crystal grains with high reflectivity. This study has observed that the nucleation and crystal growth behavior is significantly influenced by the salt concentration. Based on the pair potentials, the transition boundary has been quantitatively analyzed between fluid and crystal phases and identified the threshold for homogeneous nucleation. Utilizing the high-reflectivity colloidal crystals, band-edge lasing is achieved by dissolving the water-soluble dye into the aqueous suspensions. Upon optical excitation, a lasing emission characterized is observed by a narrow spectral width at the short-wavelength band edge. Notably, the laser wavelength can be adjusted by altering the salt concentration or particle diameter, offering a versatile approach to tuning the optical properties.
通过自发相分离利用吸引性耗尽相互作用将胶体粒子组织成具有高结晶度的晶体阵列。然而,不受控制的成核经常导致形成具有不同晶体取向的晶粒,这阻碍了光子晶体的光学性能。在此,通过在聚苯乙烯颗粒的耗尽诱导组装过程中施加离心力,设计出了具有均匀取向和高表面覆盖率的胶体晶体。离心力促使颗粒向底面移动,这促进了异质成核并支持快速晶体生长,产生具有高反射率的密集堆积且排列均匀的晶粒。本研究观察到成核和晶体生长行为受盐浓度的显著影响。基于对势,对流体相和晶体相之间的转变边界进行了定量分析,并确定了均匀成核的阈值。利用高反射率的胶体晶体,通过将水溶性染料溶解到水悬浮液中实现了带边激光发射。在光激发下,在短波长带边观察到具有窄光谱宽度特征的激光发射。值得注意的是,激光波长可以通过改变盐浓度或粒径来调节,这提供了一种调节光学性质的通用方法。