Suppr超能文献

角化黏膜宽度与部分磨牙缺失位点下牙槽骨尺寸之间的关系:一项回顾性横断面研究。

Associations between the keratinized mucosa width and the underlying alveolar bone dimensions at partial edentulous molar sites: a retrospective cross-sectional study.

机构信息

Department of Periodontology, National Center for Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Research Center of Oral Biomaterials and Digital Medical Devices, Beijing Key Laboratory of Digital Stomatology, Peking University School and Hospital of Stomatology, Beijing, China.

NHC Research Center of Engineering and Technology for Computerized Dentistry, Beijing, China.

出版信息

BMC Oral Health. 2024 Jul 15;24(1):796. doi: 10.1186/s12903-024-04590-2.

Abstract

BACKGROUND

The assessment of hard and soft tissue at edentulous sites is important for subsequent implant treatment design. The aim of the present study was to explore the associations between the keratinized mucosa width (KMW) and the underlying alveolar bone dimensions at partial edentulous molar sites.

METHODS

In this retrospective study, a total of 110 patients with at least one missing molar were selected. The buccal KMW of the edentulous molar sites was evaluated. Cone-beam computed tomography scans were collected, and the height discrepancy between the alveolar crest and the buccal bone plate (H) as well as the alveolar bone height (ABH) were measured. The KMW was compared among the H and ABH groups at both maxillary and mandibular sites. Linear regression and generalized estimation equations (GEEs) were used to explore the associations between the KMW and alveolar bone dimensions at α = 0.05.

RESULTS

Among the 110 patients, 158 edentulous molar sites were analyzed. The average H and ABH were significantly lower at the maxillary sites (1.26 ± 1.62 mm, 11.62 ± 3.94 mm) than at the mandibular sites (3.67 ± 2.85 mm, 14.91 ± 3.01 mm, p < 0.001). The KMW was significantly lower at sites with H > 2 mm than at sites with H ≤ 2 mm both in the maxilla and mandible (p < 0.001). No significant differences were found between the KMW at sites with ABH < 10 mm and sites with ABH ≥ 10 mm (p > 0.05). Linear regression and GEEs analyses revealed that the H was significantly associated with the KMW (B = -0.339, p < 0.001), while the association between the KMW and the ABH was not statistically significant (B = -0.046, p = 0.352).

CONCLUSIONS

The buccal KMW at edentulous molar sites was significantly associated with the H. Alveolar ridges presenting with a sloped configuration were more prone to possess a narrower band of keratinized mucosa. Both hard and soft tissue augmentation should be considered for implant treatment at these sites. The correlations of dynamic changes between the KMW and alveolar bone dimensions after tooth extraction should be further investigated.

摘要

背景

评估无牙颌部位的硬组织和软组织对于后续的种植体治疗设计非常重要。本研究旨在探讨角化黏膜宽度(KMW)与部分磨牙缺失部位牙槽骨尺寸之间的相关性。

方法

本回顾性研究共纳入 110 名至少缺失一颗磨牙的患者。评估无牙磨牙部位的颊侧 KMW。采集锥形束 CT 扫描数据,测量牙槽嵴与颊骨板之间的高度差(H)和牙槽骨高度(ABH)。比较上颌和下颌牙槽嵴顶至颊骨板高度(H)和牙槽骨高度(ABH)组之间的 KMW。采用线性回归和广义估计方程(GEEs)在 α = 0.05 水平下探讨 KMW 与牙槽骨尺寸之间的相关性。

结果

在 110 名患者中,共分析了 158 个无牙磨牙部位。上颌部位的平均 H 和 ABH 显著低于下颌部位(1.26 ± 1.62mm,11.62 ± 3.94mm)(p < 0.001)。上颌和下颌 H > 2mm 的部位 KMW 显著低于 H ≤ 2mm 的部位(p < 0.001)。ABH < 10mm 和 ABH ≥ 10mm 的部位 KMW 无显著差异(p > 0.05)。线性回归和 GEEs 分析显示,H 与 KMW 显著相关(B = -0.339,p < 0.001),而 KMW 与 ABH 之间的相关性无统计学意义(B = -0.046,p = 0.352)。

结论

无牙磨牙部位颊侧 KMW 与 H 显著相关。牙槽嵴呈倾斜形态的部位更容易拥有较窄的角化黏膜带。这些部位在进行种植体治疗时,应考虑进行软硬组织的增量。还应进一步研究拔牙后 KMW 和牙槽骨尺寸之间动态变化的相关性。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/9104/11251357/a1bf5392b15a/12903_2024_4590_Fig1_HTML.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验