College of Bioresources Chemical and Materials Engineering, National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science and Technology, Xi'an, Shaanxi Province 710021, China; Key Laboratory of Paper Based Functional Materials of China National Light Industry, Xi'an, Shaanxi Province 710021, China; Shaanxi Provincial Key Laboratory of Papermaking Technology and Specialty Paper Development, Xi'an, Shaanxi Province 710021, China.
College of Bioresources Chemical and Materials Engineering, National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science and Technology, Xi'an, Shaanxi Province 710021, China.
Int J Biol Macromol. 2024 Oct;277(Pt 1):133879. doi: 10.1016/j.ijbiomac.2024.133879. Epub 2024 Jul 15.
This work aims to investigate the effects of deep eutectic solvents (DES) on the chemical and physical structure of cellulose. Choline chloride-oxalic acid and choline chloride-oxalic acid-glycerol were selected as solvents and cotton fibers was sued as raw materials to explore the difference between cotton fibers treated separately with two different DES. According to yield analysis, ternary solvents alleviated the degradation of cellulose when comparing to binary solvents, resulting in over 90 % of cellulose being obtained. Particularly, there is an esterification reaction of cellulose during treatment with the DES system, which also affects the performance of the subsequent products. Through the simple use of mechanical foaming with polyvinyl alcohol and the palm wax impregnation process, foams with a water contact angle greater than 140° and excellent mechanical properties can be obtained. The resultant foam material has 5 % linear elastic area, and prominent compressive strength providing potential use in the packaging industry in the replacement of plastic.
本工作旨在研究深共晶溶剂(DES)对纤维素的化学和物理结构的影响。选择氯化胆碱-草酸和氯化胆碱-草酸-甘油作为溶剂,以棉纤维为原料,探索两种不同 DES 分别处理棉纤维的差异。根据产率分析,与二元溶剂相比,三元溶剂减轻了纤维素的降解,导致超过 90%的纤维素被获得。特别是,在 DES 体系处理过程中纤维素发生酯化反应,这也影响后续产物的性能。通过简单地使用聚乙烯醇的机械发泡和棕榈蜡浸渍工艺,可以获得水接触角大于 140°且具有优异机械性能的泡沫。所得泡沫材料具有 5%的线性弹性区,具有突出的抗压强度,为在包装行业替代塑料提供了潜在用途。