Li Yuanzhen, Fan Yinming, Wang Yanhong, Zhu Yinian, Zhu Zongqiang, Mo Shengpeng, Zhou Xiaobin, Zhang Yanping
The Guangxi Key Laboratory of Theory and Technology for Environmental Pollution Control, Guilin University of Technology, Guilin 541000, China.
Collaborative Innovation Center for Water Pollution Control and Water Safety in Karst Area, Guilin University of Technology, Guilin 541004, China.
Toxics. 2024 Jul 21;12(7):524. doi: 10.3390/toxics12070524.
VOCs can be used instead of ammonia as a reducing agent to remove NO, achieving the effect of removing VOCs and NO simultaneously. Due to the high energy consumption and low photocatalytic efficiency required for conventional thermocatalytic purification, photothermal coupled catalytic purification can integrate the advantages of photocatalysis and thermocatalysis in order to achieve the effect of pollutants being treated efficiently with a low energy consumption. In this study, samples loaded with Co and Mn catalysts were prepared using the hydrothermal method on Fe-MOF with various morphologies. The catalytic performance of each catalyst was analyzed by studying the effects of their physicochemical properties through various characterizations, including XRD, SEM, BET, XPS, H-TPR, TEM and O-TPD. The characterization results demonstrated that the specific surface area, pore volume, high valence Co and Mn atoms, surface adsorbed oxygen and the abundance of oxygen lattice defects in the catalysts were the most critical factors affecting the performance of the catalysts. Based on the results of the performance tests, the catalysts prepared with an octahedral-shaped Fe-MOF loaded with Co and Mn showed a better performance than those loaded with Co and Mn on a rod-shaped Fe-MOF. The conversions of acetone and NO reached 50% and 64%, respectively, at 240 °C. The results showed that the catalysts were capable of removing acetone and NO at the same time. Compared with the pure Fe-MOF without Co and Mn, the loaded catalysts showed a significantly higher ability to remove acetone and NO simultaneously under the combination of various factors. The key reaction steps for the catalytic conversion of acetone and NO on the catalyst surface were investigated according to the Mars-van Krevelen (MvK) mechanism, and a possible mechanism was proposed. This study presents a new idea for the simultaneous removal of acetone and NO by photothermal coupling.
挥发性有机化合物(VOCs)可用作还原剂替代氨来去除氮氧化物(NO),从而实现同时去除VOCs和NO的效果。由于传统热催化净化能耗高且光催化效率低,光热耦合催化净化可整合光催化和热催化的优势,以实现低能耗高效处理污染物的效果。在本研究中,采用水热法在具有不同形貌的铁基金属有机框架(Fe-MOF)上制备了负载钴(Co)和锰(Mn)催化剂的样品。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、比表面积分析仪(BET)、X射线光电子能谱(XPS)、氢气程序升温还原(H-TPR)、透射电子显微镜(TEM)和氧气程序升温脱附(O-TPD)等各种表征手段研究了各催化剂的物理化学性质对其催化性能的影响。表征结果表明,催化剂的比表面积、孔容、高价态的Co和Mn原子、表面吸附氧以及氧晶格缺陷的丰度是影响催化剂性能的最关键因素。基于性能测试结果,负载Co和Mn的八面体形状Fe-MOF制备的催化剂比负载在棒状Fe-MOF上的Co和Mn催化剂表现出更好的性能。在240℃时,丙酮和NO的转化率分别达到50%和64%。结果表明,该催化剂能够同时去除丙酮和NO。与不含Co和Mn的纯Fe-MOF相比,负载型催化剂在多种因素共同作用下表现出显著更高的同时去除丙酮和NO的能力。根据Mars-van Krevelen(MvK)机理研究了丙酮和NO在催化剂表面催化转化的关键反应步骤,并提出了可能的反应机理。本研究为光热耦合同时去除丙酮和NO提供了新思路。