Harnessing phosphate limestone waste as a cost-effective solution for acid mine drainage treatment.

Mining mineral ores like pyrrhotite often generates positive and negative outcomes for the community. On the one hand these valuable minerals are explored to provide economic opportunities. On the other, mining pyrrhotite presents adverse environmental and health effects that relates to acid mine drainage (AMD) formation in abandoned mines. This suggest that the sustainable mining of valuable minerals in Pyrrhotite requires cost and environmentally friendly approaches. In this research, we simulate in-situ neutralisation effect of phosphate limestone waste (PLW) on AMD from two mining sites in Morocco under continuous oxic conditions. To this end, we conducted batch tests to assess the effectiveness of PLW in mitigating AMD and releasing contaminants. These tests involved reacting limestone particles (at two sizes: <2 cm and < 4 cm) with AMD leachates over a five-day period The results indicated that the AMD is characterised by a pH of 2.5 and an electrical conductivity of 11.8 mS/cm. The inductively coupled plasma optical emission spectroscopy (ICP-OES) analyses showed a high sulfate concentration of 3668.83 mg/L and the presence of some metals, notably copper, aluminium, and iron. The neutralisation process of the AMD using PLW under oxic conditions was highlighted by the variation in pH while the water was in contact with the PLW. The pH rose from 2.5 to 5.25 while the electrical conductivity decreased from 11.8 to 7.03 mS/cm. During the treatment of the AMD with PLW, the percentage of sulfate removal from the effluent was 35 %. In addition, iron and aluminium were significantly removed from the AMD with a percentage of 99 % in the leachate. Therefore, these results indicate that neutralising AMD using this passive treatment approach is effective and may serve as a cost-effective mitigation for AMD, since no excessive grinding is required for the PLW.