Scion, Titokorangi Drive, Rotorua 3046, New Zealand; School of Physical and Chemical Sciences, University of Canterbury, Christchurch 8041, New Zealand.
Institute of Environmental Science and Research, Christchurch 8041, New Zealand; School of Physical and Chemical Sciences, University of Canterbury, Christchurch 8041, New Zealand.
Sci Total Environ. 2024 Nov 1;949:175251. doi: 10.1016/j.scitotenv.2024.175251. Epub 2024 Aug 3.
Plastics have become an essential part of modern society. Their properties can be easily manipulated by incorporating additives to impart desirable attributes, such as colour, flexibility, or stability. However, many additives are classified as hazardous substances. To better understand the risk of plastic pollution within marine ecosystems, the type and concentration of additives in plastic debris needs to be established. We report the quantification of thirty-one common plastic additives (including plasticisers, antioxidants, and UV stabilisers) in beached plastic debris collected across Aotearoa New Zealand. Additives were isolated from the plastic debris by solvent extraction and quantified using high-resolution liquid chromatography-mass spectrometry. Twenty-five of the target additives were detected across 200 items of debris, with plasticisers detected at the highest frequency (99 % detection frequency). Additives were detected in all samples, with a median of four additives per debris item. A significantly higher number of additives were detected per debris item for polyvinyl chloride (median = 7) than polyethylene or polypropylene (median = 4). The additives bis(2-ethylhexyl) phthalate, diisononyl phthalate, diisodecyl phthalate, and antioxidant 702 were detected at the highest concentrations (up to 196,930 μg/g). The sum concentration of additives per debris item (up to 320,325 μg/g) was significantly higher in polyvinyl chloride plastics (median 94,716 μg/g) compared to other plastic types, primarily due to the presence of phthalate plasticisers. Non-target analysis was consistent with the targeted analysis, indicating a higher number and concentration of additives in polyvinyl chloride debris items compared to all other polymer types. Feature identification indicated the presence of more additives than previously detected in the targeted analysis, including plasticisers (phthalate and non-phthalate), processing aids, and nucleating agents. This study highlights phthalates and polyvinyl chloride as key targets for consideration in ecotoxicology and risk assessments, and the development of policies to reduce the impacts of plastic pollution.
塑料已成为现代社会不可或缺的一部分。通过添加添加剂,可以轻松地改变它们的特性,赋予其所需的属性,如颜色、柔韧性或稳定性。然而,许多添加剂被归类为危险物质。为了更好地了解塑料污染对海洋生态系统的风险,需要确定塑料碎片中添加剂的类型和浓度。我们报告了在新西兰各地海滩上收集的塑料碎片中 31 种常见塑料添加剂(包括增塑剂、抗氧化剂和紫外线稳定剂)的定量分析结果。通过溶剂萃取从塑料碎片中分离出添加剂,并使用高分辨率液相色谱-质谱法进行定量。在所研究的 200 个碎片中,有 25 个目标添加剂被检测到,其中增塑剂的检测频率最高(99%的检测频率)。在所研究的所有样本中均检测到了添加剂,每个碎片的平均添加剂数量为 4 种。聚氯乙烯(中位数=7)的每个碎片的添加剂数量明显高于聚乙烯或聚丙烯(中位数=4)。二(2-乙基己基)邻苯二甲酸酯、二异壬基邻苯二甲酸酯、二异癸基邻苯二甲酸酯和抗氧化剂 702 的浓度最高(高达 196,930μg/g)。每个碎片中添加剂的总浓度(高达 320,325μg/g)在聚氯乙烯塑料中明显更高(中位数 94,716μg/g),与其他塑料类型相比,这主要是由于存在邻苯二甲酸酯类增塑剂。非靶向分析与靶向分析一致,表明聚氯乙烯碎片中添加剂的数量和浓度均高于所有其他聚合物类型。特征识别表明,存在比靶向分析中检测到的更多的添加剂,包括增塑剂(邻苯二甲酸酯和非邻苯二甲酸酯)、加工助剂和成核剂。本研究强调了邻苯二甲酸酯和聚氯乙烯作为生态毒理学和风险评估中需要考虑的关键目标,以及制定减少塑料污染影响的政策的重要性。