Fractionation and leaching of Cd, Cu, Fe, Pb, and Zn from smelter residues of an old environmental liability in Argentina.

An integrated chemical and mineralogical characterization approach was applied to smelter wastes collected from 50-year-old dump sites in Argentina. Characterization included pseudo-total element concentrations, acid generation/neutralization potential, sequential extractions, pH-dependent leaching kinetics, and mineralogical analysis of all residues. These analyses provided detailed information on the reactivity of the minerals in the waste material and associated metal release. Cadmium and Zn were the elements of greatest environmental concern due to their high mobility. On average, the release of Zn and Cd in pH-dependent leaching essays reached 17.6% (up to 5.24 mg g) and 52.7% (up to 0.02 mg g) of the pseudo-total content, respectively. Moreover, Cd and Zn were also the metals that showed the higher proportions of labile fractions associated to the adsorbed and exchangeable fraction (60-92% for Cd and 19-38% for Zn). Since Cd and Zn concentrations in the residue are not high enough to form their own minerals, a large proportion of these elements would be weakly adsorbed on Fe oxyhydroxides. In contrast, the low release of Cu, Pb and Fe would be associated with these elements being incorporated into the crystalline structure of insoluble or very poorly soluble minerals. Lead is incorporated into plumbojarosite and anglesite. Copper was mainly in association with Fe oxyhydroxides and may also have been incorporated into the plumbojarosite structure. The latter could act as a sink especially for Pb under the acidic conditions of the smelter residue. Despite the elevated concentrations of Pb observed in the residue, it showed a very low mobility (≈0.1%), indicating that it is mostly stabilized. Nevertheless, the smelter residue is a continuous source of metals requiring remediation.