Yermagambetova A D, Tazhibayeva S M, Tyussyupova B B, Musabekov K B, Pastorino Laura
Kazakh-British Technical University, Almaty, Kazakhstan.
Al-Farabi Kazakh National University, Almaty, Kazakhstan.
Heliyon. 2024 Jul 12;10(14):e34550. doi: 10.1016/j.heliyon.2024.e34550. eCollection 2024 Jul 30.
The effect of plasticizers, namely glycerol, sorbitol, and citric acid, on the structural and mechanical properties of biodegradable films obtained from xanthan gum (XG) and starch was studied. The plasticizing effect of glycerol, sorbitol, and citric acid on XG-starch films is justified by the destruction of intermolecular contacts between starch and XG macromolecules and the redistribution of hydrogen bonds in the system as a result of the hydrotropic action of plasticizer molecules. The use of glycerol proved to be the most effective for regulating the deformation of films, while the use of sorbitol to preserve strength. The dependence of the film roughness on the type and concentration of plasticizers was characterized. The smallest values of protrusions on the surface of XG-starch films were found in the presence of sorbitol. Considering the effect of the concentration of plasticizers on the stickiness of the surface of XG-starch films and their structural and mechanical properties, 1.5 % concentration of glycerol, sorbitol and citric acid was determined as optimal.
研究了增塑剂(即甘油、山梨醇和柠檬酸)对由黄原胶(XG)和淀粉制成的可生物降解薄膜的结构和力学性能的影响。甘油、山梨醇和柠檬酸对XG-淀粉薄膜的增塑作用是由于增塑剂分子的水溶助长作用破坏了淀粉和XG大分子之间的分子间接触,并导致体系中氢键重新分布。结果表明,使用甘油对调节薄膜的变形最为有效,而使用山梨醇可保持强度。表征了薄膜粗糙度对增塑剂类型和浓度的依赖性。在山梨醇存在的情况下,发现XG-淀粉薄膜表面的凸起值最小。考虑到增塑剂浓度对XG-淀粉薄膜表面粘性及其结构和力学性能的影响,确定甘油、山梨醇和柠檬酸的最佳浓度为1.5%。