Tanaka Satoshi, Yoshida Shinsuke, Tomio Ryosuke, Ichimasu Norio, Kawaguchi Ai
Department of Neurosurgery, Tamus Sakura Hospital Kawaguchi, Kawaguchi, JPN.
Department of Neurosurgery, Saitama Medical Center, Kawagoe, JPN.
Cureus. 2024 Jul 5;16(7):e63933. doi: 10.7759/cureus.63933. eCollection 2024 Jul.
This study reports two cases of rare symptomatic subsidence of titanium cages after anterior cervical discectomy and fusion (ACDF). First, an 82-year-old man underwent ACDF at C5/6 and C6/7 using two 6 mm height box-type titanium cages. On the 34th postoperative day, motor weakness occurred in the right upper limb, and CT showed that the cage at C5/6 had subsided 6 mm into the C6 vertebral body. On postoperative day 55, both cages were removed, and C6 corpectomy was performed. The C5-7 space was refixed with a mesh cage and plate. He was discharged home from the rehabilitation hospital three months later. Second, a 41-year-old man underwent ACDF at C5/6 and C6/7 using two 5 mm height box-type titanium cages. He fell violently on the 33rd postoperative day, causing pain from the neck to the left hand, weakness, and skillful movement disorder in the left hand, and CT showed that the cages at C5/6 and C6/7 had subsided by 7 mm and 6 mm, respectively. On the 65th postoperative day, both cages were removed by reoperation, and C6 and 7 corpectomy was performed. The space between C5 and T1 was refixed with a mesh cage and plate. He was discharged home two months later. Possible causes of titanium cage subsidence include osteoporosis, trauma, vertebral cortex damage by an operative procedure, and cage height of 6 mm or more. While ACDF is safe and effective for cervical spondylosis, special caution is needed in older osteoporotic patients.
本研究报告了两例颈椎前路椎间盘切除融合术(ACDF)后钛笼罕见的症状性下沉病例。第一例,一名82岁男性在C5/6和C6/7节段接受了ACDF手术,使用了两个6毫米高的盒式钛笼。术后第34天,右上肢出现运动无力,CT显示C5/6节段的钛笼已下沉至C6椎体6毫米。术后第55天,取出两个钛笼,并进行了C6椎体次全切除术。C5-7间隙用网笼和钢板重新固定。三个月后,他从康复医院出院回家。第二例,一名41岁男性在C5/6和C6/7节段接受了ACDF手术,使用了两个5毫米高的盒式钛笼。术后第33天,他猛烈摔倒,导致颈部至左手疼痛、左手无力和精细运动障碍,CT显示C5/6和C6/7节段的钛笼分别下沉了7毫米和6毫米。术后第65天,通过再次手术取出两个钛笼,并进行了C6和C7椎体次全切除术。C5和T1之间的间隙用网笼和钢板重新固定。两个月后,他出院回家。钛笼下沉的可能原因包括骨质疏松、创伤、手术操作导致的椎体皮质损伤以及6毫米或更高的钛笼高度。虽然ACDF治疗颈椎病安全有效,但老年骨质疏松患者需要特别谨慎。