Suppr超能文献

考虑可靠性和有效性的前交叉韧带撕裂前膝松弛度的最佳测量方法。

The optimal measurement method considering reliability and validity in the anterior knee laxity of anterior cruciate ligament tears.

机构信息

Department of Orthopaedic Surgery, Ewha Womans University Seoul Hospital, Seoul, 07804, Republic of Korea.

Department of Orthopedic Surgery, Gangnam Severance Hospital, 211 Eonju-ro, Gangnam-gu, Seoul, 06237, Republic of Korea.

出版信息

Arch Orthop Trauma Surg. 2024 Aug;144(8):3523-3532. doi: 10.1007/s00402-024-05465-5. Epub 2024 Aug 6.

Abstract

INTRODUCTION

To seek an optimal measurement method with high reliability and high validity for evaluation of the anterior knee laxity on stress radiographs and comparing the translation values to those of KT-2000 arthrometer.

METHODS

Anterior knee laxity in 77 patients was measured preoperatively using the TelosTM and the KT-2000 arthrometer. Side-to-side difference measurements were taken using three conventional measuring methods and one proposed method (Modified Lateral). The knee position on the stress radiograph was evaluated and scored based on the stress radiograph qualifying criteria depending on stress film correctiveness. Intraclass correlation coefficients were analyzed to evaluate the reliability of the measurement methods and were compared between high (Group H) and low (Group L) radiograph quality score groups for each method. Validity was assessed by comparing the KT-2000 and the TelosTM using Pearson correlation (r value).

RESULTS

The Modified Lateral method showed the best Intraclass Correlation Coefficients (ICCs), followed by Center to Center, and Medial to Medial and Lateral to Lateral methods without considering the quality of Telos. In the comparison between groups based on Telos quality for intra-rater reliability, the Medial to Medial (MM) method demonstrated the best reliability in both groups (MM: ICCs, Group H = 0.942, Group L = 0.917, P = 0.693). As for inter-rater reliability, the Modified Lateral (ML) method exhibited the best reliability in both groups (ML: ICCs, Group H = 0.923, Group L = 0.882, P = 0.547). The value measured using the ML method in Telos showed the highest correlation coefficient with the KT-2000 measured value in both groups H and L. There were no statistically significant differences among the correlation coefficient values.

CONCLUSION

The Modified Lateral method is recommended for its high reliability, taking into account the differences in bilateral knee positions and anatomical discriminability on stress radiographs when evaluating anterior knee translation with Telos. It also best reflected the KT-2000 arthrometer.

LEVEL OF EVIDENCE

Case Series, Level IV.

摘要

介绍

寻求一种可靠且有效的测量方法,以评估在应力 X 光片中的前膝松弛度,并将测量值与 KT-2000 关节测量仪进行比较。

方法

术前使用 TelosTM 和 KT-2000 关节测量仪对 77 例患者的前膝松弛度进行测量。使用三种常规测量方法和一种改良的外侧法(改良外侧法)进行侧间差异测量。根据应力 X 光片的校正标准,对 X 光片上的膝关节位置进行评估和评分。采用组内相关系数(ICC)分析评估测量方法的可靠性,并对每种方法的高(组 H)和低(组 L)X 光片质量评分组之间进行比较。通过 Pearson 相关性(r 值)比较 KT-2000 和 TelosTM 来评估有效性。

结果

改良外侧法的组内相关系数(ICC)最高,其次是中心到中心法和内侧到内侧法、外侧到外侧法,而不考虑 Telos 的质量。在内测信度方面,根据 Telos 质量对组间进行比较时,内侧到内侧(MM)法在两组中均表现出最佳的可靠性(MM:ICC,组 H=0.942,组 L=0.917,P=0.693)。在外测信度方面,改良外侧法(ML)在两组中均表现出最佳的可靠性(ML:ICC,组 H=0.923,组 L=0.882,P=0.547)。Telos 中使用 ML 法测量的值与两组 H 和 L 中 KT-2000 测量值的相关系数最高。各相关系数值之间无统计学差异。

结论

改良外侧法推荐用于评估 Telos 前膝移位时,考虑到双侧膝关节位置的差异以及在应力 X 光片上的解剖可分辨性,该方法具有较高的可靠性。它还能最好地反映 KT-2000 关节测量仪的结果。

证据等级

病例系列,IV 级。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验