Joe Sung-Yoon, Yoon Beomhee, Shin Doyoon, Bae Wan Ki, Lee Sang-Shin, Lee Hyunho
Nano Device Application Center, Department of Electronic Engineering, Kwangwoon University, Seoul 01897, Republic of Korea.
SKKU Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University, Suwon 16419, Republic of Korea.
ACS Appl Mater Interfaces. 2024 Sep 4;16(35):46486-46494. doi: 10.1021/acsami.4c10646. Epub 2024 Aug 21.
Positive aging has been reported to be effective for enhancing electroluminescence characteristics of quantum dot (QD) based optoelectrical devices. This study investigated the intricate mechanisms underlying the positive aging effect in quantum-dot light-emitting diodes (QLEDs) influenced by encapsulation with ultraviolet-curable resin. A 120-h analysis assessed the impact of the resin on the electron transport layer and emission layer, utilizing a strategically positioned perfluorinated ionomer (PFI) interlayer. The PFI layer effectively delayed the AlO formation at the zinc magnesium oxide (ZMO)/Al interface and further reduced the interactions within the QD/ZMO interface, thereby curtailing exciton quenching at the interfaces. The time-sequential effect of positive aging demonstrated that resin encapsulation effectively passivates the ZMO surfaces after 12 h. The positive aging facilitated the reaction between aluminum and oxygen from ZMO, contributing to AlO formation within 48 h of aging. Furthermore, positive aging passivated the defect states of the QD surface and the QD/ZMO interface, reducing exciton quenching at the QD or QD/ZMO interface. The enhanced electron injection and reduced exciton quenching resulted in aged InP QLEDs, exhibiting an external quantum efficiency of 12.04%. This is a significant increase from the 3.16% observed in the control device. Finally, a sequential mechanism of positive aging in InP QLEDs was devised, providing new insights into the time-related operation of aging agents. This study elucidates an advanced time-resolved mechanism of positive aging, thereby offering valuable insights into the intricate dynamics of excitons within the domain of QLED physics.
据报道,正向老化对于增强基于量子点(QD)的光电器件的电致发光特性是有效的。本研究调查了受紫外光固化树脂封装影响的量子点发光二极管(QLED)中正向老化效应背后的复杂机制。一项120小时的分析评估了该树脂对电子传输层和发射层的影响,采用了一个精心定位的全氟离子聚合物(PFI)中间层。PFI层有效地延缓了氧化锌镁(ZMO)/铝界面处AlO的形成,并进一步减少了QD/ZMO界面内的相互作用,从而减少了界面处的激子猝灭。正向老化的时间序列效应表明,树脂封装在12小时后有效地钝化了ZMO表面。正向老化促进了铝与ZMO中的氧之间的反应,有助于在老化48小时内形成AlO。此外,正向老化钝化了QD表面和QD/ZMO界面的缺陷态,减少了QD或QD/ZMO界面处的激子猝灭。电子注入的增强和激子猝灭的减少导致老化的InP QLED的外量子效率达到12.04%。这比对照器件中观察到的3.16%有显著提高。最后,设计了InP QLED中正向老化的顺序机制,为老化剂的时间相关操作提供了新的见解。本研究阐明了正向老化的先进时间分辨机制,从而为QLED物理领域内激子的复杂动力学提供了有价值的见解。